To reset your heater, when the Overheat Protection System has been activated:
1.Turn the Power Control Switch to the “0” postion, and turn the Temperature Control Switch to the lowest setting, 2. Disconnect the power cord from the electrical outlet.
3. Allow your heater to cool down for approximately ten minutes, 4. Ensure that both the intake and exhaust vents are clear of obstructions.
5. Connect the power cord to the electrical outlet 6. Turn the Power Control Switch to the “Ⅱ“ position, and tum the Temperature Control Switch to the highest setting.
7. If your heater does not operate normally, turn the PowerControl Switch to the "0" position, disconnect the power cord from the electrical outlet, and consult an authorized repair technician.
The unit fails to operate:
1.Some wrong operations have been taken.-- Review the manual to ensure that the basic operations and features are fully understood.
2.Something is wrong with the household circuit breaker or fuse.-- Check the household circuit breaker or fuse.
3.Check for obstructions at the intake and exhaust vents.-- If obstructions are present, please refer to the instructions to reset the heater when the Overheat Protection System has been activated.
If no obstructions are present and the heater still does not operate normally, please turn the Power Control Switch to the “0” position, disconnect the power cord from the electric outlet, and consult an authorized repair technician.