USER MANUAL

LED ZOOM MOVING HEAD LIGHT

(19*15W RGBW 4IN1 DMX 512 16/11CH)

Please read carefully the manual before operation

Important notice

In this instruction for use contains about the installment and the use aspect important information of the LED moving head. When installing and using, you need to look this usage instruction strictly.

Before open the LED moving head and if you want to do the repair work, please make sure the power source is at the separation condition.

Attention

Unceasingly carries on the product improvement about our company the policy, in this instruction booklet carries the data will have the possibility to be able to change in the future, when no longer separate notice change matters concerned. Our company retains when the product improvement changes the related specification the authority. This instruction booklet publisher cannot be responsible regarding this instruction booklet in information accuracy, also cannot the related consequence which causes regarding these information be responsible.

Product Illustration

Our product adopt semiconductor to produce radiation, LED as light origin. With advantage of operation quietly, less power waste, high brightness, gaily-colored, astigmatic, high longevity (60-100 thousands hours), non-calorific etc. Our product apply to use 4 kinds light as red, green, blue, white LED, synthesize turn colors under election, can create effect of auto gradual change/skip change color, frequent blinking. Can accept control by DMX512, real save power, no pollution green lighting tool.

Technical parameters

Voltage / frequency: 90-230V/50-60Hz

Bulbs: 19*10W RGBW

Power:250 W

Control signal: DMX 512, in sets at the automatic procedure

Channel: 16/11CH, DMX512 channel control

Motion: level 540°, vertical 280°, horizontal and vertical uses the electronic replacement function

Color: 16.7 million kinds of colors changes

Adjusts the light: 0-100 electron adjusts the light, various colors may alone move also may mix the color tone

Strobe: 1-25/second high speed strobe, but single color mixes the color strobe

ZOOM angel: 105-30 degree adjustable

Functional description 

Controller can control Moving head light’s three axes (PAN axis, TITL axis and Zoom axis)

The light have RGBW 4IN1 Multi-Chip LED Lamp, and 3IN1 Tricolor RGB LED Moving Head, and 3color and 4 color, it have DMX mode (can be set DMX address), self-propelled mode (can be set up master-slave), Sound mode (can be set master / slave).

The mode selection can be set by the panel or DMX 512 controller (this must be set to DMX mode);

The light also have strobe / random frequency flash / strobe out fast and slow / slow forward faster strobe mode, the

color jump / gradients

The connection of control correspond wire

The connection of controller between the led moving head lamp and respectively led moving head lamp should use the twin core shielded cable, and the diameter of each core at least be 0.3mm. After receives the DMX512 signal, the lamp of nearby the address switch condition will glisten. When it’s do not receive the DMX signal, the lamp will in extinguish condition, but if the signal lamp glisten continuously, the mean is the DMX signal is not be correct.

When installing, uses the DMX signal terminal is much better. It can avoid the digital control signal breached by the electrical noise. Generally speaking, the DMX terminal is Cannon plug coupling, it has a 120 ohm resistances between the 2 feet and 3 feet, it will connected on the last led moving head lamp’s digital plug of the led moving head lamp chain.

       Connecting DMX512 digital signal, please using high quality screen line to connect it, for fear interfering.

The connection of Power Cable

Use the provided plug to connect the main power to the projector paying attention to the voltage and frequency marked on the panel of the projector. It is recommended that each projector be supplied separately so that they may be individually switched on and off.

IMPORTANT

It is essential that each projector is correctly earthed and that electrical installation conforms to all relevant standards. Power consumption of this projector is 200VA.

The connection of Power cable between the led moving head lamp and respectively led moving head lamp should use the three core shielded cable,

Power cable joint (at most 4pcs) in each other, this is the Connector picture as below:

Important Notice:

In order to avoid overloading the power supply, the power cable can only supply power for at most 4 of moving head lights.

Detailed function instruction:

• Menu

• Channel List

Powered on LED Moving light, connect it to the DMX controller,after receiving the DMX signal, the signal mark X disappeared,then light is under DMX controller’s control.

Under DMX Mode,connecting multiple lights together,but disconnect with DMX controller, all lights can work in the same step. When connected the first one to controller, the whole group can move in the same step under DMX controller’s control.

Difficult processing

Other maintenance work should be carried out by experienced technicians.