• Store Home
  • |
  • New Arrival
  • |
  • Ending Soon
  • |
  • Add to Favourites
  • |
  • View Feedback
  • |
  • Contact us
    • Store Categories
    3/8" 175-185 Electric Engine Fan Thermostat Temperature Relay Switch Sensor Kits

    Package Include:
    1X 3/8" NPT Thermostat
    1X Wiring Harness w/ Mount
    1X 60 Amp Relay
    1X 30 Amp Circuit Breaker
    3X Small Ring Terminals
    1X Large Ring Terminal
    1X Harness Mounting Screw
    2X Butt Connectors
    2X Sheet Metal Screws
    1X Female Connector
    As the picture shown


    Thermostat Kit:

    Work with any 12 volt system.
    Universal fit for any automotive vehicle and electric fan.
    Activates by grounding electric fans at preset temperature.
    185'F turn-on temperature, 165'F turn-off temperature.
    Probe typically threads into radiator, water outlet or manifold.


    Thermostat Relay Kit Instructions：
    RED + connect directly to battery.
    WHITE wire to ignition switch power source.
    BLACK goes to thermos switch.

    BLUE wire goes to the Fans.


    Description:

    • 100% Brand New, Never been used.
    • Material: Plastic and Metal
    • Voltage: 12V DC
    • 165~185 degree electric fan thermostat relay switch kit, It is a 3/8" pipe thread
    • The kits includes everything you'll need to hook up to your fan
    • Comes on at 185º AND Turns off at 165º
    • The kits is set up to turn your electric fan on at 185 degrees and shut off at 165 degrees and will work with any 12 volt system
    • Fits for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines
    • Please check the size measurement chart carefully before making a payment
    • Please allow 0.1-0.5cm difference due to manual measurement
    • Instruction is not included.
    • Professional installation is highly recommended


    About the Relay

    Relay is an electrical control device that usually used in automatic control circuit.
    The relay in fact is an automatic switch which uses a smaller current to control a larger current.


    What's the Relay Used for

    Compatible with almost all automobiles and devices equipped with a 12V DC power supply.
    Like starter kills, power door lock/actuator control, change a low current output to high current,
    add ignition/accessory outputs,control motors/other electronics.
    It is also suitable for automobile used for control, alarms, horn, headlight and more.


    About the Relay Pins

    Pins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to
    turn on the relay.
    - Pin 85 - is usually negative (-)
    - Pin 86 - is usually positive (+)
    Pin 30 - is either a (+) or (-) source that feeds Pin 87 or Pin 87a
    Pin 87 - when the relay is 'on': Pin 30 and Pin 87 are connected


    What's Note
    * The relay is rated for 30A, while the socket 14AWG wires are not big enough for the rated 30/40 amps.
    If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector,
    carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it.
    Also, you can use 6.3 mm female connectors to connect directly to the relay pins. The relay should be good for 30 amps.

    THE PROBLEM WE WILL HELP YOU SOLVED OUT!


    With design, production, sales, after-sales as one of the model, one-stop solution to customer problems.


    Ebay highly rated seller, more than 10 years of product experience, self-brand management.



    All orders will be sent within one business day after payment received.
    Note: Please contact for quote if international postage NOT display.
    (shipping and handling charge is only for the lower 48 states in USA, other states'[Alaska, Hawaii, and Puerto Rico etc.] shipping cost , please contact us for quote.)
    Paypal ONLY --the easiest and most secure way to pay on line

    A new return is considered a brand new item that you ended up not needing or perhaps you purchased incorrectly for your specific vehicle.

    Please keep in mind that spending time before purchasing the part to confirm it is indeed exactly what you need can help prevent you from ordering the wrong part.

    Please remember to email us which warehouse to send the item back before return. And all returns must be shipped back in their original factory packaging.

    Shipping Damage

    Shipping damage is any item/package suspected of being broken or damaged in anyway during the shipping process. We purchase full insurance for this, however the damage must be reported to us within 3 days of receiving the package.

    Warranty against manufacture defect.

    Replace/return are available if buyers receive wrong/damaged/defective items.
    For replacement or return , buyer should keep the item in acceptable packing.

    Before replace or return ,buyer should submit proof to us by pics if possible.

    Anyway ,by nice communications ,we can find a way to make you satisfied

    Very appreciated for your support. I hope you are happy with your purchase.

    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us.

    We request that you contact us immediately BEFORE you give us or feedback, so that we can satisfactorily address your concerns.

    If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.

    We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!

    Package Include:
    1X 3/8" NPT Thermostat
    1X Wiring Harness w/ Mount
    1X 60 Amp Relay
    1X 30 Amp Circuit Breaker
    3X Small Ring Terminals
    1X Large Ring Terminal
    1X Harness Mounting Screw
    2X Butt Connectors
    2X Sheet Metal Screws
    1X Female Connector
    As the picture shown


    Thermostat Kit:

    Work with any 12 volt system.
    Universal fit for any automotive vehicle and electric fan.
    Activates by grounding electric fans at preset temperature.
    185'F turn-on temperature, 165'F turn-off temperature.
    Probe typically threads into radiator, water outlet or manifold.


    Thermostat Relay Kit Instructions：
    RED + connect directly to battery.
    WHITE wire to ignition switch power source.
    BLACK goes to thermos switch.

    BLUE wire goes to the Fans.


    Description:


    About the Relay

    Relay is an electrical control device that usually used in automatic control circuit.
    The relay in fact is an automatic switch which uses a smaller current to control a larger current.


    What's the Relay Used for

    Compatible with almost all automobiles and devices equipped with a 12V DC power supply.
    Like starter kills, power door lock/actuator control, change a low current output to high current,
    add ignition/accessory outputs,control motors/other electronics.
    It is also suitable for automobile used for control, alarms, horn, headlight and more.


    About the Relay Pins

    Pins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to
    turn on the relay.
    - Pin 85 - is usually negative (-)
    - Pin 86 - is usually positive (+)
    Pin 30 - is either a (+) or (-) source that feeds Pin 87 or Pin 87a
    Pin 87 - when the relay is 'on': Pin 30 and Pin 87 are connected


    What's Note
    * The relay is rated for 30A, while the socket 14AWG wires are not big enough for the rated 30/40 amps.
    If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector,
    carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it.
    Also, you can use 6.3 mm female connectors to connect directly to the relay pins. The relay should be good for 30 amps.

    Datacaciques