eBay

Product Information

Spring Strut / Channel nuts provide a secure anchor point in cable, tray and pipe support systems and other applications where are rectangular nut is required. Simply insert the nut into the trough of the channel, twist into position so that the grooves are aligned with the internal edges of the strut. Threading and tightening a screw into the hole causes teeth located in the grooves to bite into the channel edge, positively locking the nut in place so it can’t slip
Suitable for: 41mm high channel, the long spring holds the nut securely in place, acting as a "third hand"
Other applications: Roof Racks, Aluminium Extrusions
Also known as: Channel Nuts, Strut Nuts
Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material to use in marine, coastal, chemical and food environments. Stainless steels are largely non-magnetic, but it is not uncommon for some stainless steel fasteners to show a small degree of magnetism. This is partly due to the manufacturing process
Galling: can occur when excessive pressure is used to tighten a nut onto a thread, common with stainless fasteners but can also be an issue with other materials. Fasteners with damaged or fine threads are particularly prone to galling.
Some suggestions to help prevent thread galling:
Tightening the nut more slowly without excessive pressure, will frequently reduce or sometimes solve completely, the problem. As the installation RPM speed increases, the heat generated with friction during tightening escalates the chances of thread galling.
Reduce the friction by applying a suitable lubricant to the thread frequently eliminates thread galling. Typical lubricants are chloride-paraffine, molykoat lacquer, molybdenum disulphide, high pressure oil, graphite, mica, or talc, some assemblies where there is extreme pressure, corrosion resistant grease or waxes may also be effective
Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
Photos: Represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
PDF data sheet: PDF data sheets are provided as a reference guide only. Specifications may change without notice
Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and The Fastener Warehouse is not responsible for any loss, claim or damages arising therefrom. In developing this information, The Fastener Warehouse has made a determined effort to present it accurately
Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia