JieCaiZi 85mm 80MPH GPS Speedometer Odometer for Auto Marine Red LED Waterproof
Features:
Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments.
Function: instrument with stepper motor pointer, with polarity protection,with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration
Specifications:
Brand: Jiecaizi
Operating temperature: -40°C ~+85°C
Protection rank: IP67
Indicating range: 0-80MPH
Operating voltage: 9-32VDC
Fixing dimension:85mm
Style: stainless steel plate
Background color: black
Backlight : Red→Green→Blue→White→Yellow→Yellow Green→Orange→Purple
Item weight: 330g
New Features:
1)7 Colors Backlight Optional
Qickly press the SET button (<1second) to change the backlights as below:
Red(Defaut)→Green→Blue→White→Yellow→Yellow Green→Orange→Purple→Automatic mode
Automatic mode: The color will cyclically flash as above for every 2 seconds
2) Odometer Programmable
While the device works normally,long press the button(≥5 seconds)to modify the total mileage(6 digits).
User could modify the flashing digit only. Each digit can be changed from 0-9
and you can quickly press the button(< 1 second)to select the digit to be modified.
3) Odometer Reset to Zero
Press the button(≥10 seconds) to set the total mileage to zero
4) Odometer Accumulation
Accumulated mileage, it never returns zero when power off
1.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 85mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 85mm of the instrument panel at the back of the instrument.
2.After the instrument is mounted in the panel,Screw down with a fixed ring.
3.Connect the wire,the instrument housing is directly connected to the 12/24V power supply.
4.Insert wire harness,Firmly locked in the table.
Wiring Harness:
Red---9+32VDC
Orange---Backlight(+)
Blue---Ground(-)
Package Included:* Speedometer* Cable* GPS Receiver
* Installation instruction