Sand Blasting Gun with Carbide Nozzle

Specifications:

Operation:

1.The Operator Inserts The Nozzle Washer Into a Contractor-Thread Nozzle Holder And Screws In The Nozzle, Turning It By Hand, Until It Seats Firmly Against The Washer.

2.With All Related Equipment Correctly Assembled And Tested, The Operator Points The Nozzle At The Surface To Be Cleaned And Presses The Remote Control Handle To Begin Blasting.

3.The Operator Holds The Nozzle 18 To 36 Inches From The Surface And Moves It Smoothly At a Rate That Produces The Desired Cleanliness. Each Pass Should Overlap Slightly.

4.The Operator Must Replace The Nozzle Once The Orifice Wears 1/16-Inch Beyond Its Original Size.

Note:
In The Process Of Using The Sand Blaster Gun, You Must Pay Attention To Your Safety And Operate Carefully As Well. At The Same Time, Do Not Aim The Sandblasting Gun At Person Or Animals For The Sake Of Safety.

Product Highlights
⭐【Sandblasting Gun】
Our Sandblaster Gun Is Made Of Al Alloy Through Die-Casting, Which Is High Quality, Serviceable, Smooth Sandblasting And Wear Resistance.
⭐【Support Multiple Media】
Designed For Surface Cleaning,Rust Removal And Glass, Aluminum Alloy And Other Decorative Surface Sandblasting,Marble Engraving.
⭐【Easy To Use】
A Blast Nozzle Accelerates The Air And Abrasive As The Mixture Exits The End Of The Hose. Applicable To Box Manual Sandblasting Machine And Box Type Automatic Sandblasting Machine.
⭐【High Quality】
The Taper And Length Of The Nozzle's Inlet And Outlet Determine The Pattern And Velocity Of The Abrasive Exiting The Nozzle. The Composition Of The Liner Material Determines Its Resistance To Wear.
⭐【Applications】
It Is Great For Various Works Including Glass Blasting , Removing Rust, Paint And Scale On Automobiles, Hot Tubs And Other Surfaces.

Datacaciques