Listing Includes
1 (One) Class A Customs 35 Gallon Fresh / Gray Water Holding Tank Part# T-3500
Read Entire Listing
Frequently Asked Questions At Bottom
Before You Purchase
Free Shipping (when offered) is for the 48 Contiguous U.S. only
Check Ship-to Address is correct & complete - Lot # / Apartment # / Suite #
Larger Items that don't fit in mailbox carrier may decide not to leave, you will need to arrange delivery with the carrier.
Multiple Tracking Numbers eBay will only upload one tracking
number per order. If you need the other tracking numbers send a
message do not open a case as it is not necessary.
Item Details
Fresh / Drinking Water Safe
BPA Free and MADE IN USA Class A Customs located in Elkhart,
Indiana is the manufacturer of this item. Class A Customs does not carry
BPA nor uses it in the manufacturing process.
NSF Certified Materials Tank & fittings made from DOW NSF
International NSF/ANSI Std 61 approved Medium Density Polyethylene
(MDPE) Resin - Paperwork is located on our main site - * No NSF Logo in
tanks
UV-8 stabilization
Complies with:
U.S. FDA 21 CFR 177.1520 (c)3.1a
Canadian HPFB No Objection
Underwriters Laboratories Inc.
EU, 10/2011
NSF International NSF/ANSI Std 61 (sec 4 & 5)
Food Vendors You must verify requirements with health
department where inspection will be made before purchasing. Codes vary
by local health departments, not states, we are not aware of the
codes.
Forward the Class A Customs NSF Letter provided on our main site to your local health
department before purchasing to be sure these tanks will pass your
local inspection, this is your responsibility. * No NSF Logo in tanks
Non-Pressurized Tank All water tanks we carry must be vented allowing air in and out during use, they are not pressurized tanks.
Fresh or Gray Water Use ideal for food vendors and extra water storage
Seamless One-piece seamless construction, no seams to burst
Resistant Stain Corrosion and Rust Resistant
Color Creamy White so you can see waterline through tank
Tank Preparation Tanks are made in a warehouse light
scratching, scuffs, or dust may be present on tanks and does not
effect performance of tank. Sanitize each tank prior to use to remove
any debris from the manufacturing process, wipe with a damp cloth to
remove surface dust or scuffs.
Installation & Plumbing Have a certified technician install all parts to prevent product damage and personal injury.
Do Not Pressurize Tank A garden hose is a pressurized water line, do not
make a secured connection to the water tank with a pressurized line this will void any warranty on the tank.
Tanks need to be gravity feed, this allows for air to escape while the
water is going into the tank, see Basic Plumbing Diagram in photos.
Turning a garden hose on half way does not work because you can control
the amount of water flowing but not the pressure in the line, leaving
the tank to fill risks exploding the tank.
Class A Customs carries Gravity Fill Dishes in our online store that can be used with our fresh tanks.
Do Not over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Check our store for fill dishes, food grade fill hose and basic
plumbing items. You will need to verify items needed, we are not aware
of what you need.
Mounting & Bracing Tank needs to be adequately supported, sit on level surface and braced to prevent movement during transit
Do Not hang tank by ratchet straps, this is too thin and will not adequately support tank. Examples of bracing and supporting tanks can be found on Class A Customs Blog.
Do Not place weight on tank, if you need to stack the tanks you will need a weight bearing shelf between them.
Tank Measurements (+/- .25" on each measurement)
38.5” does not include fittings x 12” x 17.25 ” (rotate tank to change height or width)
Average thickness 7/32" +/-
Fittings Installed In Tank See Photos
Two) 1.5" Female NPT Fitting - fitting is sealed to use remove membrane with razor knife
Two) .5" Female NPT Fitting - fitting is open
OEM Parts
Have a certified technician install all parts to prevent product damage
and personal injury. No retail box, no installation instructions. Please
research before purchasing this item, online videos and installation help can be found by searching classAcustoms blog
Manufacturer Warranty
Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank. Using this tank for any purpose other than fresh or gray water storage will void any/all warranty. Do Not use tanks for sewage or fuel. Warranty does not cover install by customer or non-certified technician.
No warranty, guarantee or liability is stated or implied on any product beyond the manufacturer.
Class A Customs is not responsible for any damages caused from the use of this or any product we carry. Please research before purchasing this item, online videos and installation help can be found by searching classAcustoms blog
FAQ's and Item Help
Question: Can I hook a garden hose directly to the tank?
Answer: No, do not make a sealed connection to the tank using a
pressurized water supply, a garden hose is a pressurized water supply.
It is recommended to use a fill dish that allows for gravity feeding of
the tank, please review our basic plumbing example for more information.
Question: Can I cut a hole in the tank and glue a new fitting in?
Answer: No, the tank fittings are not glued in they are spun welded during the manufacturing process. We do offer Uniseal Fittings that are food safe and allow you to put a fitting in anywhere on the tank.
Question: I need a custom tank can you make it?
Answer: Class A Customs can manufacture custom tanks, however you would need to pre-pay for a mold and the tank, typical mold price is over $5,000.00
Question: I need a ____ Water Tank, do you have other sizes?
Answer: Class A Customs manufactures several sizes of Fresh / Gray / Waste and Livewell tanks - you can see the on our Class A Customs Water Tank List.