Hutchins 700 ProFinisher Random Orbital Air Sander, 5/16" Orbit, 6" PSA Pad, 12000 RPM

• Hutchins 700 ProFinisher random orbital air sander is a 6 inch PSA pad palm sander with a 5/16 inch orbit engineered for fast material removal and a quality finish. Operating at 12,000 RPM with about 10.7 CFM air demand, it delivers low vibration performance for professional surface prep; this is not a replacement part.
• Features:
  • 5/16 inch random orbit provides aggressive cut for rapid stock removal while maintaining a uniform scratch pattern
  • 6 inch PSA backing pad accepts pressure sensitive adhesive discs for quick changes and secure adhesion
  • Approximately 10.7 CFM at 90 PSI supports consistent speed under load in typical shop air systems
  • Ergonomic, low vibration design helps reduce operator fatigue during extended sanding sessions
  • Non vacuum configuration simplifies hookup and minimizes tool weight for general body and paint prep
• Specifications:
  • Manufacturer: Hutchins
  • Part Number: 700
  • Pad Size and Type: 6 inch PSA
  • Orbit: 5/16 inch (approximately 8 mm)
  • Speed: 12,000 RPM
  • Air Consumption: approximately 10.7 CFM at 90 PSI
  • Sound Level: 81 dBa
  • Weight: about 3 lb
  • Configuration: non vacuum
  • Air Inlet: 1/4 inch
  • System Compatibility or Application: standalone pneumatic random orbital air sander for surface preparation; not a replacement for a specific SKU (note: 700H is the hook pad variant)
• The ProFinisher random orbital air sander can also be referred to as 6 inch PSA palm sander, 5/16 inch orbit DA sander, pneumatic random orbital sander, body shop air sander, and Hutchins 700 sander.

 

Hutchins manufactures professional pneumatic sanding tools and accessories for automotive, industrial, and marine finishing applications through authorized distributors.

 

Q: What pad type does the 700 use?
A: The 700 is supplied with a 6 inch PSA backing pad. If you need hook and loop, choose the 700H variant.

 

Q: What air supply is recommended?
A: Plan for approximately 10.7 CFM at 90 PSI with a 1/4 inch air inlet to maintain rated performance at 12,000 RPM.

 

Q: Is this a vacuum model?
A: No. The 700 is a non vacuum sander. Hutchins offers separate vacuum models and conversion options if dust collection is required.