FITMENT:

2001-2003 Acura CL

2006-2011 Acura CSX

2013-2021 Acura ILX

2001-2006 & 2014-2016 Acura MDX (2007-2013 has 5x120 PCD)

2007-2021 Acura RDX

1997-2004 Acura RL

2002-2006 Acura RSX

1996-2008 Acura TL

2015-2020 Acura TLX

2004-2014 Acura TSX

1998-2021 Honda Accord (5 Lug Model Only)

2006-2021 Honda Civic (Except Type-R)

2012-2015 Honda Crosstour

1997-2021 Honda CR-V

2011-2016 Honda CR-Z

2003-2011 Honda Element

2016-2021 Honda HR-V

2019-2021 Honda Insight

1995-2004 Honda Odyssey

2003-2008 Honda Pilot

1997-2001 Honda Prelude

2000-2009 Honda S2000 (For Rear Wheels ONLY)

SPECIFICATION:

Spacer Thickness:20 mm

Bolt Shack Length:27 mm

Torqued Down By Hand At:70-80 FT/LBS

Hub Bore:64.1 mm

Number of Pieces: 2

Position:
Front+Rear+Left+Right

NOTE??

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not  installed.(returns are not accepted if spacers-adapters have been installed to your vehicle).

?

What are Wheel Spacers?

Also known as wheel adapters, wheel spacers are special components that help create extra wheel track width. They are fitted between the wheel hub assembly and the wheel itself to increase space. Every wheel gets displaced outward by a distance equal to the spacer’s thickness. 

As aforementioned, the primary purpose of wheel spacers is to increase space between the hub assembly and the wheel. It usually is not appropriate for the wheel to be very close to other inner parts like the wheel well. It will lower the driving performance, especially when the tyre rubs against the suspension components when making turns.

Wheel spacers are primarily used in vehicles with wider tyres during custom installation, where the tyres you are installing are larger than the tyres that came with the car. As a result, wheel spacers improve vehicle handling and provide better traction on the road.

STEPS TO PROPERLY INSTALL WHEEL SPACERS:

Step 1: Preparation

Step 2: Loosen All Lug Nuts

Step 3: Lift the Car

Step 4: Remove the Wheel

Step 5: Prepare the Wheel Hub

Step 6: Install the Wheel Spacer

Step 7: Torque the Matching Lug Nuts Tighten using the star pattern as shown below when following the numbers in order.

Step 8: Remount the Wheel

Step 9: Carefully Lower the Vehicle

Step 10: Torque the Lug Nuts to Specification

Step 11: Repeat Steps 1-10 for the Remaining Wheels