These are 3D-printed side plate grips for Mathews Target or Hunting Compound Bows made in 2019 or newer. The bow shown in the photos is a Lift X 33. It has also been tested On a V3 and a TRX 38G2. But are compatible with Mathews Title, Arc, Vertix, and many others.

When I designed these, I wanted the grips to match the shape of the riser perfectly. I went through over 20 iterations, tweaking the dimensions until I got it just right. On top of that, they have a nice flat shape with rounded edges to improve comfort and accuracy. The side plates also have a slightly textured surface which enhances grip.

I also wanted these to be as thin and light as possible. One plate is only 2.6mm thick and other is 3.2mm thick, depending on if you are right or left handed. They stick out just a hair from the riser to get the right fit. The thinness makes the bow more resistant to hand torque. Combined, they only weigh about 0.5 ounces. This saves almost half an ounce from the stock grip.

Note: Switching to side plates will increase your brace height and draw length by about 1/8" to 3/8" depending on which grip you had on previously. Removing the standard Bond grip from my bow increased it by about 1/8". But it increased it by about 3/8" when I removed my Torqueless bow grip.

CUSTOM COLORS AND TEXT ARE AVAILABLE:

If I don't have a variation set for a color you want, please message me so we can work together. I can order almost any color that you want. I will have to charge a higher price to offset the cost of buying materials and it will take a few days longer to produce. But I will usually include 2 for the price.

Included:

- side plate set

- pre-install double-sided tape

Disclaimer: these grips are 3D-printed and made to order. I will make sure that the grips are of good quality. But there will be slight cosmetic imperfections due to the inconsistency of 3D printing.