Features:

The standard resistors for multimeters on the market are modified with European standard sockets or thermocouple sockets. They are not tight when into the multimeter, which results in a large error in the resistor. Some sellers also use multimeters that are not very accurate and reliable.

This product uses a 3D printed shell with a beautiful design. It is also tight when into the multimeter. There is no problem of poor with the multimeter jack. It has been tested for 6.5-digit multimeters and has good accuracy.

Specifications:

Part name: multimeter standard resistor

Material: abs

Color: as shown

Size Size: As shown in the figure

Pitch: P=19.05mm

Shell material: 3D printed for PLA material

type: 4mm lantern banana head

Applicable objects: handheld and desktop multimeters (less than four and a half digits)

Accuracy and temperature drift: 0.1%25PPM (actual resistance accuracy is above 0.05%)

OR resistor (2-wire short circuit) actual resistance is about 1.4mQ

Model: 100R/1K/10K/100K/1M/10M; 200R/2K/20K/200K/2M/20M

Package content:

1*standard multimeter resistor

Note:

1: Please allow 1-2 cm error due to manual measurement, please make sure you do not mind before ordering.

2: Due to the difference between different monitors, the image may not reflect the actual color of the item

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.