AIRCAT 6280 Composite Angle Air Die Grinder with Spindle Lock, 0.75 HP, 18000 RPM, 1/4" Collet

• AIRCAT 6280 is a composite angle die grinder designed for precision work in tight spaces. A 0.75 hp non stall motor and 18000 rpm free speed drive rapid material removal, while a spindle lock and ergonomic controls simplify accessory changes and handling. This is not a replacement part.
• Features:
  • 0.75 hp non stall motor and 18000 rpm free speed support fast grinding and deburring on metals
  • Spindle lock enables quick accessory changes to minimize downtime between tasks
  • Composite handle with top mounted speed control aids comfort and precise throttle modulation
  • Rear exhaust and internal silencing help manage noise, listed about 79 dBA
  • Precision Erickson style 1/4 inch collet and 5 to 1 bevel gears promote smooth, accurate operation
• Specifications:
  • Manufacturer: AIRCAT
  • Part Number: 6280
  • Product Type: Angle die grinder
  • Collet Size: 1/4 inch
  • Free Speed: 18000 rpm
  • Motor Power: 0.75 hp
  • Air Inlet: 1/4 inch NPT
  • Average Air Consumption: 4.1 cfm
  • Recommended Hose Size: 3/8 inch inside diameter
  • Exhaust: Rear
  • Gearing: 5 to 1 bevel gears
  • Noise Level: 79 dBA
  • Weight: 1.8 lb
  • Overall Length: 7 inch
  • System Compatibility or Application: For grinding, deburring, and surface prep with 1/4 inch shank abrasives on shop air systems at 90 psi; not a replacement part
  • Alternate Identifier: ACA6280 distributor code
• The AIRCAT 6280 angle die grinder can also be referred to as angle die grinder, composite angle die grinder, 0.75 hp die grinder, 1/4 inch collet die grinder, and spindle lock angle grinder.

 

AIRCAT is a manufacturer of high-performance pneumatic power tools, primarily known for its impact wrenches, ratchets, and grinders. Founded in 1998 and now a part of the Continental Tool Group, the brand specializes in tools that offer high torque with significantly reduced noise levels—often marketed under the slogan "More Power, Half the Noise". 

 

Q: What air setup is recommended for the 6280?
A: Use clean, lubricated air at 90 psi with a 1/4 inch NPT inlet and a minimum 3/8 inch inside diameter hose to maintain performance.

 

Q: Does it include a spindle lock for faster wheel changes?
A: Yes. The tool has a spindle lock to speed accessory changes and reduce downtime.

 

Q: How loud is the tool in use?
A: Listed noise is about 79 dBA with the rear exhaust and internal silencing helping to reduce sound levels.