JieCaiZi 85mm 80MPH GPS Speedometer Odometer for Auto Marine Truck 7 Colors LED
JieCaiZi 85mm 80MPH GPS Speedometer Odometer for Auto Marine Red LED Waterproof
Features:
Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments.
Function: instrument with stepper motor pointer, with polarity protection,with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration
Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments.
Function: instrument with stepper motor pointer, with polarity protection,with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration
Specifications:
Brand: Jiecaizi
Operating temperature: -40°C ~+85°C
Protection rank: IP67
Indicating range: 0-80MPH
Operating voltage: 9-32VDC
Fixing dimension: 52mm/2-1/16
Style: stainless steel plate
Background color: black
Backlight : Red→Green→Blue→White→Yellow→Yellow Green→Orange→Purple
Item weight: 330g
Operating temperature: -40°C ~+85°C
Protection rank: IP67
Indicating range: 0-80MPH
Operating voltage: 9-32VDC
Fixing dimension: 52mm/2-1/16
Style: stainless steel plate
Background color: black
Backlight : Red→Green→Blue→White→Yellow→Yellow Green→Orange→Purple
Item weight: 330g
New Features:
1)7 Colors Backlight Optional
Qickly press the SET button (<1second) to change the backlights as below:
Red(Defaut)→Green→Blue→White→Yellow→Yellow Green→Orange→Purple→Automatic mode
Automatic mode: The color will cyclically flash as above for every 2 seconds
2) Odometer Programmable
If the device is well connected with GPS signal,long press the button(≥5 seconds) to enter into the Odometer Programmable Mode(6 Digits Can be Reset).we name it X1 X2 X3 X4 X5 X6
If you see digit X1 flashing,it means that you can set it from 0 to 9 by long pressing the button.
If you want to modify digit X2 X3 or X4,Just take a quick press on the button to move to the digit that you want to work with.
If no movement is done within 5 seconds, it will switch out of the Programmable mode and save all the changes if applicable.
3) Odometer Reset to Zero
Press the button(≥10 seconds) to set the total mileage to zero
4) Odometer Accumulation
Accumulated mileage, it never returns zero when power off
1)7 Colors Backlight Optional
Qickly press the SET button (<1second) to change the backlights as below:
Red(Defaut)→Green→Blue→White→Yellow→Yellow Green→Orange→Purple→Automatic mode
Automatic mode: The color will cyclically flash as above for every 2 seconds
2) Odometer Programmable
If the device is well connected with GPS signal,long press the button(≥5 seconds) to enter into the Odometer Programmable Mode(6 Digits Can be Reset).we name it X1 X2 X3 X4 X5 X6
If you see digit X1 flashing,it means that you can set it from 0 to 9 by long pressing the button.
If you want to modify digit X2 X3 or X4,Just take a quick press on the button to move to the digit that you want to work with.
If no movement is done within 5 seconds, it will switch out of the Programmable mode and save all the changes if applicable.
3) Odometer Reset to Zero
Press the button(≥10 seconds) to set the total mileage to zero
4) Odometer Accumulation
Accumulated mileage, it never returns zero when power off
1.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 85mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 85mm of the instrument panel at the back of the instrument.
2.After the instrument is mounted in the panel,Screw down with a fixed ring.
3.Connect the wire,the instrument housing is directly connected to the 12/24V power supply.
4.Insert wire harness,Firmly locked in the table.
Wiring Harness:
Red---9+32VDC
Orange---Backlight(+)
Blue---Ground(-)
* Speedometer
* Cable
* GPS Receiver
* Installation instruction
* Installation instruction
