|
|
Description
| |
Shipping
Warranty/Preview
| |
IMPORTANT SET-UP INSTRUCTIONS 1. Spread a large piece of tarpaulin on the ground where you want your inflatable to stand and place it at the center; 2. Locate the zipper doors at the back of the base/feet of your inflatable and place 3 sandbags (each weighing about 10-15 lbs) inside ; 3. Locate the inflation (air intake) sleeve at the base/feet and tie it over the mouth of the blower before inflation; you can tie the ropes/straps to the loops on the inflatable either at this time or after it’s completely inflated; the inflatable should lie on its side at this point; 4. Have a couple of helpers gently push from the back while having a couple of people gently pulling the straps in the front to make it stand up; you can only tie up the straps or ropes to the stakes, sandbags or nearby fixtures as the last step; 5. Check air pressure inside balloon by feeling/pressing your inflatable; the rule of thumb is that your inflatable is best kept up with minimum air pressure; if it feels too tight or firm please open the zipper doors partially to release some pressure. CAUTIONS - Please do not use in winds 25 mph or higher and please air dry it when wet before folding away for storage. |