XTOOL D8S V2.0 Bidirectional OBD2 Scanner with Topology Mapping: 2026 Upgrade of XTOOL D8, Scan Tool with 42+ Resets, Key Programming, Full System Automotive Scanner Diagnostic Tool, PMI for Ford, FCA AutoAuth, CANFD/DoIP

Works directly on 2018+ Dodge, Chrysler, Jeep, and Fiat vehicles—no complicated bypass cables needed.

New Pre-/Post-Scan Comparison & Diagnostic Report V2.0
Clearly compare vehicle conditions before and after repairs. Enjoy faster, more user-friendly diagnosis with live data graphing, recording, playback, and CSV export—organize and analyze performance data with ease. XTOOL never stops improving!

PMI (Programmable Module Installation)
When replacing or initializing a new or used module on Ford, Lincoln, or Mazda vehicles, transfer data from the original module to the new unit for seamless replacement.

OE-Level Full System Diagnostics
Access all available vehicle modules to view real-time live data streams, freeze frames, and ECU info. With an extensive DTC database and definitions, read/clear DTCs and perform active bidirectional controls to pinpoint faults—including alternator testing.

High-End Intelligent Topology Mapping
Packs the value of a $1,000 scanner—intuitive module mapping helps DIYers, mechanics, and technicians diagnose issues quickly and accurately, saving time and money on repairs. A truly cost-effective and user-friendly diagnostic tool.

42+ Maintenance & Special Functions
Oil reset, EPB, BMS, SAS, DPF, throttle relearn, ABS bleed, injector coding, air suspension, transmission relearn, TPMS reset, airbag repair, hybrid control compression test, HVAC module calibration, zero-point calibration, injector balance test, fuel trim reset, cylinder power balance, crankshaft sensor relearn, PCM VIN rewrite, alcohol composition reset, suspension calibration, and more.

Advanced Online/Offline ECU Coding
Unlock hidden functions on BMW, Ford, Mazda, VW/Audi/Skoda, Toyota/Lexus/Scion, and Lincoln vehicles. Activate higher-level features, improve performance, and perform OE-level personalization, modifications, recoding, relearns, and adaptations—previously only available on top-tier scanners.

4,000+ Bidirectional Controls
Take full control of vehicle components for active tests: EVAP test, idle relearn, injector test, ABS pump cycling, A/C clutch on/off, window control, fuel trim reset, fuel composition reset, and more.

Supports CAN FD, DoIP & RP1210 Protocols
Access next-gen protocols: CAN FD (for GM models after 2019) and DoIP (for BMW E/F/G chassis, Jaguar, and Land Rover vehicles).

Unlock Hidden Functions
Disable auto start-stop, daytime running lights, seatbelt chime; delete transport mode; clear transmission adaptive values; set speed limits; and more.
❗ Some functions may not be available on certain models. Contact us for details.

VAG Guided Functions
Step-by-step instructions help you perform special functions, advanced coding, and other complex procedures with confidence.

Auto-Scan & Auto-VIN
Automatically detect Vehicle Identification Numbers (VIN) for faster, streamlined diagnostics.

13-Year Trusted Brand | 3-Year Updates | 23 Languages | Responsive Support
The XTOOL D8S V2.0 comes with 3 years of free updates. After that, you can continue using the latest software. Covers 12V OBD2 vehicles worldwide: 1996+ US, 2003+ European, 2009+ Asian models. Supports 23 languages—pre-installed English and Spanish; others available upon request with your tool’s S/N.

Premium Hardware Specs
Android 10 OS | 8″ touchscreen | 36,500 mWh battery (5,000 mAh, 7.3V) | 1024×768 resolution | Quad-core 1.5 GHz CPU | 4GB RAM + 64GB ROM | 8MP rear camera (compatible with XV200 endoscope).

10,000+ Vehicle Coverage
Comprehensive support for American, European, Asian, and Japanese brands.

🚗：Can perform Online Coding to flash the hidden features,
🚗：Personalized Settings, or disable the annoying functions,
🚗：Reprogram the adaptive data for certain components after repairs or replacements.
🚗：Alter the configuration so that the new actuators can be recognized by related vehicle systems.
⭐⭐:The ECU coding function is used to reflash the vehicle control module, which allows you to match repaired or replaced components to the ECU
⚠️Note: Please be reminded that D8S does not have ECU Programming function.

1. ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.
2. Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.
3. Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
4. EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
5. BMS Match: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
6. DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.
7. IMMO / Key Programming: Remote Key/Key Fob add and programming+ Read Pin Code+ IMMO Reset, etc.
8. Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
9. ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal .
10. SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
11. Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
12. Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data. ect.
Commonly-used Special Functions also include:
TPMS Reset, Air Suspension, Gear Learning(Cam Crankshaft Relearn), Gearbox(Transmission) Match, Headlight Adjustment, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Language Change.
{Growing with updates, you can receive 3 years of free software updates upon purchase}
⭐⭐D8S also provides quick access to the vehicle systems for various advanced functions for specific vehicle models, such as:
Transmission Service Fast Relearn, Fuel Injector Balance, Crankshaft Sensors Relearn, Idle Learn, Zero- Point Calibration, Fuel Alcohol Composition Reset, HVAC Actuator Calibration Test, WCS Reset, VIN Registration(Write), SWS Initialization, QuickLearn, Injector Fuel Rate Programming, etc are all available.

XTOOL D8S can perform Read PIN Code+ Add new key + Disable lost key + Remote learning + Key Learning + Key Matching Functions etc
● Remote Key/Key Fob add and programming+ Read Pin Code+ IMMO Reset, etc
● Work With KC100 for VW 4th/5th IMM
● Work With KC501 For Benz infrared key
● Work With KS01（need Kc100 together ) For toyota all key lost
● Work With M821 (need with kc501) for benz all key lost
● Work With M822 (need with kc501) For toyota 8A Key
● Work With endoscope of XV200
● Work With SK1 for Toyota Bench-free Pincode-free Auto Key Coding