VA89-BBL375P/R/A/N-94A - SPAL Brushless Fan 12" (305mm) - 30107198

SPAL Automotive is a well renowned designer & manufacturer of high quality automotive electric radiator fans, founded in 1959 they have since become the supplier of choice for many high volume & specialist automotive manufacturers throughout the world. SPAL Automotive have extensive design, testing and manufacturing facilities that allow them to produce consistent high quality products that can withstand the most demanding conditions.

SPAL's latest generation brushless drive technology has become the ‘go to’ cooling solution for automotive applications – providing intelligent, software driven thermal management for cars, bus & coach engines, battery and hybrid engines, as well as oil cooling and air conditioning.

SPAL Brushless Fan Motors are IP6K9K and IP68 rated, this protection offers the highest stability, durability and lifelong performance for motors used in extreme working conditions. All IP6K9K and IP68 certified SPAL motors are Water Proof which means they are completely sealed and therefore protected against ingress of solid and liquid agents.

Specification	Metric	Imperial & Other
Airflow Max	2800 m3/hr	1648 cfm
Weight	2.2 kg	4.85 lbs
Blade Diameter	∅ 305mm	∅ 12"
Housing Diameter	∅ 332mm	∅ 13"
Housing Depth	76.5mm	3"
Speed Derating Threshold	105 °C	221 °F
Operational Fan Speed	800 - 3100rpm
Voltage	24v
Operating Supply Voltage Range	16 - 32v
Supply Voltage To Reach Max Speed	26 - 32v
Current Continuous	8 - 10a
Power Consumption	384 - 768w
Time From 0 To Full Speed	11 seconds
Motor Type	Brushless (up to 40,000 hrs)
Protection	IP6K9K and IP68 Certified
Warranty	36 Months
Manufacturer	SPAL Automotive
Certifications	UNI EN ISO 9001:2008, ISO TS 16949, ISO 14001
SPAL Type Number	VA89-BBL375P/R/A/N-94A
SPAL Part Number	30107198

SPAL Brushless fans with diameters 255, 280, 305, 405 (mm) are designed with an “A” suction blade optimized to give the best efficiency in one direction only.

You can obtain both airflow directions out of the same fan simply by mounting the fan upside down.

SPAL recommend mounting a Brushless Fan within a cowling in order to cool the entire surface of the radiator/cooler and obtain the maximum efficiency available.

This SPAL brushless fan is supplied with a 3 Pin Female DELPHI connector only, please see below for the correct part number for the male connector kit and recommended wire diameters.

SPAL Brushless fan DELPHI Male Connector - Part number: 12185126

Pin Number	Wire Colour	Annotation	Use	Recommended Wire Size
1	Black	+D	Drive Positive Supply	2.5mm²
2	Brown	-D	Drive Negative Supply	2.5mm²
3	Yellow	PWM* / E*	PWM Input / Low Active Enable Input	0.75mm²
4		N.D	Empty Pin Slot
5	Blue	EI	PWM Input / Low Active Enable Input	0.75mm²
6	White	FO	PWM Input / Low Active Enable Input	0.75mm²

Q: Should I buy a SPAL fan?

A: SPAL have been around since 1959 and are the go-to manufacturer for OEM's and the aftermarket for ultra-reliable and high performance fans and blowers, their products are built to last. When a manufacturer offers a 36-Month warranty on their products then you know it's good quality.

Q: What fan size should I chose?

A: Go for the biggest fan you can fit to your radiator, if you have a slim and long radiator then it may be best to run twin fans, especially in warmer climates.

Q: How do I control the fan?

A: Basic control of SPAL brushless fans can be performed by a single on/off switch, analogue or digital signal. Please refer to the technical data sheet for further information on brushless fan control.

Q: Push or Pull?

A: Push fans sit in front of the radiator and push air through the core, Pull fans sit behind the radiator (usually the engine side) and draw air through the core.