Features & Benefits
Trustworthy replacement
- engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured
- extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design
- the use of model steel, a thicker and strengthened design, enhances the support the lifter
Easy installation
- reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Easy to Spot Signs of a Window Regulator Failure
Speed problems: When you roll the window up or down, the speed may increase or decrease. When cars designed their regulator, the speed was carefully adjusted to guarantee that the glass is not damaged. If the speed changes, it could cause the glass to break.
Anormal noise: When the window is moving up or down, it should be nearly noiseless. But when the window regulator faili, the noises may sound like clicking, grinding, or chattering.
Problems closing it: If the window rises slowly, jams crooked, or doesn’t close fully. Window motors deteriorate with age, and when they fail, they may provide a slower spin. When the regulator begins to show symptoms of wear, your window may glide up and down more slowly than normal, or it could become off kilter if a cable brakes due to uneven motor use.
Broken motor: If the window motor runs but the window doesn’t move, your regulator is most likely not functioning anymore.
General Instruction on How to Install the Window Regulator
Step 1: Detach the door panel
Step 2: Loosen the bolts and screws for the regulator and window glass. Raise the glass window and secure it with tape
Step 3: Take out the old regulator and motor
Step 4: Install the new regulator in the same position
Step 5: Reinstall all the bolts and screws
Step 6: Tighten the screws with the wrench
Step 7: Connect the wires to the window motor
Step 8: Lower the glass window to the new regulator and tigthen the mounting hardwares. Put back the plastic liner and door panel
Step 9: Test if the regulator functions good
Notes
Precautions before purchasing this product:
- Please confirm the OE number matches.
- Please install the product with the flame off.
- Please confirm the vehicles' model, year, body style as well as the connector when you purchase.
Differernt installation reocedures will ber varied by differebt vehicles.
Please refer you manual book from 4S shop for specific installation reocedures, or it will be highly recommended that you could have your skilled technician to install this part.