Turning Parameters
Maximum workpiece swing diameter on the bed: 125mm
Maximum workpiece length: 180mm
Maximum workpiece swing diameter on the tool turret: 60mm
Spindle through-hole diameter: 9mm
Spindle taper: MT.1
Metric thread pitch range/number of types: 0.4-1.5mm/8
Inch thread pitch range/number of types: 0.0028-0.0055 1/n"/8
Number of longitudinal feed rates: 2
Number of longitudinal feed rates per spindle turret revolution: 0.07-0.14mm
Tailstock quill travel: 18mm
Tailstock quill taper: MT.1
Spindle speed range: 560-2500 rpm
Spindle speed levels: 5
Motor power: 120W
Drilling and Milling Parameters
Maximum Drill Diameter: 6mm
Distance from Spindle End to Worktable: 180mm
Distance from Spindle Centerline to Column Surface: 125mm
Drilling and Milling Head Rotation Angle About the Column: 360°
Spindle Speed Range and Speeds: 500-2500 rpm, 10 Speeds
Drilling and Milling Head Vertical Lift: 60mm
Working Surface Width: 60mm
Working Table Length: 85mm
Working Table T-Slot Width: 8mm
Spindle Sleeve Travel: 40mm
Product dimensions and packaging are manually measured. Minor variations are normal. Please refer to the actual product for details.
Appearance Dimensions: 520 × 300 × 410mm
Packaging Dimensions: 550 × 300 × 480mm
On 25-Nov-2025 at 05:16:58 GMT, seller added the following information: