This listing is for nXp8002 Amplifier only. Use description below as a general reference. Ashly’s new line of nX Power Amplifiers feature lightweight, energy-efficient Class-D switching amplifier technology combined with a switch mode power supply. nX amplifiers are available in three product families (nX, nXe, nXp) and are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. nXp Series features Protea™ DSP and is available in either 2 or 4-channel models. Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation. When in sleep mode, the nX amplifiers draw less than 1 Watt. nXp is networkable with Ethernet control. It also has serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability all controlled using our Protea™ Software Suite. nXp amplifiers add 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone and noise-masking. Swept load impedance monitoring is available on each amplifier channel output Features - 2 and 4-channel high-output, lightweight amplifiers with programmable output on each channel (High-Z or Low-Z, selected via rear panel DIP switches)
- FIR Filter Ready
- Power-saving, Energy Management System� (Ashly EMS™) automatic < 1W sleep-mode (defeatable)
- Front panel power switch and level controls (can be disabled for security)
- Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
- Remote DC level control on each input channel
- Switch mode power supply automatically detects 120V or 240V AC operation
- Extensive protection circuitry, continuously variable cooling fans
- Multiple independent internal power sup?plies provide increased channel separation and reliability
- Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED
- Serial data port for use with Ashly remote control devices, or optional RS-232 con- verter for third party controllers (INA-1)
- Use Protea™ Software to remotely disable all front panel controls, including the on/ off switch, for a tamper-proof installation
Specifications: | | 3000 & 1500 Watt Models | 800 & 400 Watt Models | | nXp Series | nXp 3.04 | nXp 3.02 | nXp 1.54 | nXp 1.52 | nXp 8004 | nXp 8002 | nXp 4004 | nXp 4002 | | Channels | 4 | 2 | 4 | 2 | 4 | 2 | 4 | 2 | | "Max Output Power: Measured in Watts, Per Channel, Low-Z Output, Ail Channels Driven | | 2 Ohms | 3 000 | 3 000 | 1 500 | 1 500 | 800 | 800 | 400 | 400 | | 4 Ohms | 2 000 | 2 000 | 1 500 | 1 500 | 800 | 800 | 400 | 400 | | 8 Ohms | 1 250 | 1 250 | 1 250 | 1 250 | 800 | 800 | 400 | 400 | | "Low I Output: Measured in Watts, Bridge Mode, All Channels Driven | | 4 Ohms | 6 000 | 6 000 | 3 000 | 3 000 | 1 600 | 1 600 | 800 | 800 | | 8 Ohms | 4 000 | 4 000 | 3 000 | 3 000 | 1 600 | 1 600 | 800 | 800 | | *70V, 100V Output: Meosured in Watts, All Channels Driven | | 70V {per channel) | 2 450 | 2 450 | 1 500 | 1 500 | 800 | 800 | 400 | 400 | | 100V {per channel) | 1 250 | 1 250 | 1 250 | 1 250 | 800 | 800 | 400 | 400 | | Total Power Draw, Meosured in Watts: Total for aH Channels | | Sleep Mode | <1 | <1 | <1 | <1 | <1 | <1 | <1 | <1 | | Standby Mode | 70 | 40 | 70 | 40 | 40 | 25 | 40 | 25 | | Idle (no signal) | 100 | 55 | 100 | 55 | 70 | 40 | 70 | 40 | | Current Draw: Meosured in Amps, Total for oil Channels, 120VAC, Divide by 2 for 240V | | Sleep Mode | 0,1 | 0,1 | 0,1 | 0,1 | 0,1 | 0,1 | 0,1 | 0,1 | | Standby Mode | 1,30 | 0,70 | 1,30 | 0,70 | 0,70 | 0,38 | 0,70 | 0,38 | | Idle (no signal) | 1,85 | 1,00 | 1,85 | 1,00 | 1,30 | 0,70 | 1,30 | 0,70 | | Max Current Draw: Meosured in Amps, Typical Input, AD Channels Driven, Divide by 2 for 240V | | X Max Power at 2 Ohms | 29,5 | 14,7 | 16,0 | - | - | | - | 2,6 | | Thermal Dissipation: BTU/hr, Typical Input, Total for oD Channels | | Sleep mode | <3.4 | <3.4 | <3.4 | <3.4 | <3.4 | <3.4 | <3.4 | <3.4 | | Standby mode | 238 | 136 | 238 | 136 | 136 | 85 | 136 | 85 | | Idle (no signal) | 340 | 187 | 340 | 187 | 238 | 136 | 238 | 136 | | XMax Power at 20hms | 2 720 | 1 360 | 1 700 | 850 | 970 | 495 | 595 | 305 | * Measurements based on CEA-2006/490A, 20mS 1kHz 1% THD+N, 480mS 1kHz -20dB. | Specifications | Notes: OdSu=0.77S VftMS | | Voltage Gain | Selectable at 26d8,32dB, 38dB, or 1.4V | | Damping Factor | >250 (8 Ohms load <lkHz) | | Input High Pass Filter | 80Hz 2nd order | | Distortion (SMPTE, typical) | <0.5% | | Distortion (THD-N, typical) | <0.5% (8 Ohms, lOdB below rated power, 20Hz—20kHz) | | Channel Separation | -75dB (dB from ful output, 1kHz) | | Signal-to-Noise (20Hz-20kHz, unweighted) | >114dB (all 3.0x models) >llldB (all 1.5x models) >108dB (all 800x models) >105dB (all 400x models) | | Frequency Response | 20Hz-20kHz,+/-0.05dB | | Balanced Input Connector | Euroblock 3Jmm, 1/4’ TRS & XLR Combo jack | | Input Impedance | 10k Ohms | | Maximum Input Level | +21dBu | | Speaker Output Connector | Neutrik* speakON* | | Control Network | Compatible w/ standard 100MB Ethernet | | AUX Output Connector | Balanced Euroblock 3.5mm | | AUX Output Maximum Level | +21dBu | | Remote Standby Contact Closure | Euroblock 3.5mm, close contact to GND for standby mode | | Preset Recall Contact Closure | Euroblock 3.5mm, close contact to GND for preset 1-4 recall | | Data Connection | Euroblock 3.5mm - Gnd, +18V, In, Out | | Fault Condition Logic Outputs | Euroblock 3.5mm - 4 available | | Remote DC Level Control | Euroblock 3.5mm - Gnd, CV, V+ per input | | Attenuators (per channel) | Front panel, software, offset link group, and remote. Fully off=Mute | | Amplifier Protection | Inrush current imitation, temperature monitoring, output over-power protection, mains fuses | | Cooling | Continuously variable temperature controlled axial fan(s) | | Environmental | 32-113 deg F, (0-45 deg, C) (noncondensing) | | Weights and Dimensions | | Unit Weight | 1.54/3.04:28.7lbs (13kg) 1.52/3.02:22.7lbs (10.3kg) 4002/8002:22.2lbs (10.1kg) 4004/8001:25.9lbs (11.7kg) | | Shipping Weight | 1.54/3.04:35.2lbs (16kg) 1.52/3.02:29.2lbs (13.3kg) 4002/8002:28.7lbs (13.1kg) 4004/8001: 32.4tos (14.8kg) | | Unit Dimensions (all models) | 19"W x 3.5"H x 16.84’D (483mm x 89mm x 428mm) | | Shipping Dimensions | 24.5"W x 22’H x 5.25’D (622mm x 559mm x 133mm) | | Power Requirements ( at 50/60Hz) | | Nominal (Automatic Sensing SMPS) | 120VAC | 240VAC | | Operating Range | 70-135VAC | 140-270VAC | | Minimum power-up | 85VAC | 170VAC | | Power Cable Connector | 20ApowerCON* (32A powerCON* 3.04 model only) | |
