IPR-10G2-SDI provides monitoring of HD SMPTE ST 2110 signals across 10 GigE to two 3G-SDI ouputs. It receives SMPTE 2110 over 10 GigE connectivity, formats the data for output over 3G-SDI, and the associated audio from the video stream is extracted, synchronized, and embedded into the 3G-SDI signal and also output on an analog RCA interface.� The IPR-10G2-SDI features 2x 10 GbE SFP+ cages allowing “hitless switching”, providing redundancy protection for critical distribution and monitoring applications. The IPR-10G2-SDI also offers 1x Reference In via BNC. This makes it ideal for integrating into existing basebands environments such as master control, a truck, or an edit suite. IPR-10G2-SDI extracts a SMPTE ST�2110�essence from an incoming IP stream and presents it for display on SDI devices. �Providing two SFP+ cases for protection with "hitless switching".�Its rugged, fanless, Mini-Converter design is ideal for placement in a wide range of display scenarios, from studios to field. Features - SMPTE�ST 2110 audio, video receiver
- Supports HD up to 60p,�YCbCr 4:2:2� � �
- Rugged,�fanless design
- 2x�10 GigESFP+ cages for media LAN (providing support for "hitless switching) with status light
- 1x�1 GigERJ45�socket for control LAN with status light
- 2x 3G-SDI Outputs
- Full 10-bit pixel processing pipeline
- Embedded�SDI audio output (up to eight channels)
- 2x RCA analog audio output
- 1x BNC Reference In
- 1x mini-USB port for initial network configuration with AJA�eMini-Setup�software
- Complete control interface on any web browser from a built-in�webserver
- Customizable control with AJA REST API
- 5-year international warranty and support
Monitor ST 2110 Video and Audio from anywhere on the Network. The IPR-10G2-SDI is a SMPTE�ST�2110 to SDI Mini-Converter suited for point-of-use applications including source monitoring and 3G-SDI output to compatible devices. With two 3G-SDI outputs with mirrored source video, you can drive a display and connect to 3G-SDI simultaneously. With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay�via IP and provide SDI monitoring at the destination while feeding your video and audio further into a 3G-SDI chain. The AJA IPR-10G2-SDI receives SMPTE�ST 2110 IP video and audio, then formats the data for output over 3G-SDI. The audio associated with the video stream is extracted, synchronized, and then embedded into the SDI�interface as well as output on an analog RCA interface. Workflow IPR-10G2-SDI provides two SDI outputs from SMPTE ST 2110 video and audio over IP compatible devices. Combine your IPR-10G2-SDI units with AJA KONA IP (I/O card for use in desktop workstations) to instantly create a real-world ST 2110 workflow for video over IP production and monitoring. User Control IPR-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB�connector facilitates quick and simple initial network�configuration, and�firmware updates. - 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
- HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
- Web and REST clients supported
- 1x USB 2.0 Mini-B (IEC 62680-1) connector
- AJA eMini-Setup of network parameters
Universal Power Supply All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world. Compact and Portable AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can"t accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations. AJA Quality - Guaranteed All AJA Mini-Converters are covered by a five year warranty and AJA"s advanced replacement policy. If a replacement is necessary, AJA will ship a new unit immediately without the need to send the original unit back first, ensuring you are up and running again as quickly as possible. Specifications: Video Formats - (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080i 50, 59.94
- (HD) 1280 x 720p 50, 59.94, 60
- (SD) 625i 50
- (SD) 525i 59.94
Video Quality - 10-bit, 4:2:2, uncompressed
Discovery, Registration and Control - NMOS
- Ember Plus (no discovery, control only)
Media Transport Interfaces - SMPTE ST 2110
- 2x SFP+ Cages - SFPs not included�
- Recommended 10 GigE SFP+ modules:
- Arista Networks SFP-10G-SR Compatible 10GBASE-SR�
- Fiberstore SFP-10GSR-85 10G SFP+ 850nm
- Finisar FTLX1471D3BCL (for single mode 1310nm)
- Mellanox MFM1T02A-SR 850nm 10G
� Note: Maximum supported SFP+ power is 500 mWatts per SFP+ cage Video Input IP - SMPTE ST 2110
- Single channel input
- Dual channel input for hitless switching (based on SMPTE ST 2022-7)
Video Output Digital - 2x 3G SDI BNC (single source, mirrored output)
- 4:2:2 10-bits/pixel (embedded audio)
Audio Output Digital - Up to 8-Channel, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Output Analog - 2x RCA analog audio
- Levels at -10 dBu (nominal)�
Reference - 1x BNC
- Analog Color Black or HD tri-level sync
- Reference input is terminated into 75 ohms�
User Controls - 1x RJ-45 for 10/100/1000 Base-T Ethernet
- Web and REST clients supported
- 1x USB 2.0 Mini-B connector
- AJA eMini-Setup of network parameters via local desktop computer
Size (w x d x h) - 5.07" x 0.94" x 5.06" (128.78 x 23.88 x 128.52 mm)
Weight Power - 5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Environment - Safe Operating Temperature: 0 to 40 C (32 to 104 F)
- Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
- Operating Relative Humidity: 10-90% noncondensing
- Operating Altitude: <3,000 meters (<10,000 feet)
| 
