TEKONSHA 8508220 Brake-EVN Proportional Brake Controller for Trailers with 1-4 Axles, Compatible with Ford, GM, Chevy, Dodge, RAM, Toyota. Wiring Harness is NOT Included.
- COMPATIBILITY: The BRAKE-EVN electric brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and more with 2, 4, 6, and 8 brakes (1-4 axles). VEHICLE-SPECIFIC TEKONSHA PLUG & PLAY BRAKE CONTROLLER WIRING HARNESS SOLD SEPARATELY.
- PROPORTIONAL ELECTRIC BRAKE CONTROLLER: Provides automatic braking based on the intensity and rate at which you apply your tow vehicle’s brakes, thanks to an internal inertia sensor. This makes the Tekonsha BRAKE-EVN brake controller ideal in any braking situation.
- EASILY INSTALL THANKS TO PLUG & PLAY: The BRAKE-EVN trailer brake controller has a Plug & Play port for two plug adapters and a removeable electrical connector so the unit can be easily unplugged.
- EASY-TO-READ LED DISPLAY: Digital LED display shows settings, real-time diagnostics, and alerts.
- MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The BRAKE-EVN will apply power to your trailer’s brakes up to the amount of power previously set.
From the manufacturer
DIGITAL READOUT
With its highly visibly, simple to read digital readout, the BRAKE-EVN lets you quickly monitor your and trailer brake settings and connection. Easily view power output, boost, and more while a continuous diagnostic check monitors your connection and alerts you of any electrical issues, so you can fix any problems before they land you on the side of the road.
MANUAL OVERRIDE
If you ever need to manually apply the trailer's breaks simply slide the BRAKE-EVN's override lever to the desired power output. Unlike a “push knob” for manual override, the sliding level allows you to increase the trailer's braking at variable rates allowing you to give your brakes a little, or a lot, of stopping power depending on your needs.
BOOST BUTTON
When towing a heavy load you may need a little extra effort from your trailer's brakes to ensure a smooth, safe, comfortable stop. Boost allows a more aggressive setting, increasing the sensitivity of the brake controllers inertial sensor and enhancing the participation of the trailer's brakes during a braking event.
QUICK AND EASY DISCONNECT
With an included plug and play wiring port that adapts to all Tekonsha 2-plug vehicle specific brake controller wiring harnesses, the BRAKE-EVN allows for quick connection between the controller and tow vehicle for fast and easy installation or removal.
WORKS PROPORTIONALLY IN REVERSE
When you need to back your trailer into a tough spot the BRAKE-EVN has you covered, braking proportionally in reverse to apply the appropriate braking power based on the deceleration of the tow vehicle. This allows for smoother stopping even when backing up without experiencing the sudden braking jolts that can often be felt when using a time based controller.
SELF-LEVELING
There's never a need to worry about adjusting the BRAKE-EVN brake controller based on the terrain you are towing over. The Primus IQ’s internal technology automatically levels as you drive, so there's no problem using it while traversing steep hills or when towing through the mountains.
USE WITH 1-4 AXLE TRAILERS
This easy-to-use brake controller can be used with trailers from one to four axles, giving you flexibility to tow nearly any trailer you please – all while enjoying the braking security only Tekonsha can provide.
|
|
Prodigy iD
|
Prodigy P3
|
Prodigy P2
|
Primus IQ
|
 |
|---|
NO instructions included
please
see pictures you'll get what you see only and make sure you are able to handle
it.
real picture
provided
· Please don’t leave us any negative/neutral feedback or open any claims before contacting us, we always try our best to provide satisfied solution for our customers.
If for any reason you are unsatisfied with your purchase, please, contact me right away to resolve immediately. Thank you for your purchase!