Description
18650 Lithium Battery Capacity Tester Meter Battery Internal Resistance Tester Module w/ Type-C Port
Features:
- It can measure single-channel internal resistance and capacity;
- It supports charging, and up to 9 charge and discharge cycles are supported in automatic mode
- Stop discharge voltage is adjustable in 11 steps, i.e. 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V and 3.5V
- Using DC two-wire method to test internal resistance
- Chinese and English can be switched
- The maximum charge and discharge current is about 1A
Attention:
- During use, charging and discharging process will generate local high temperature, please ensure that the use of the environment is open and uncovered. It is better if a fan can be added for cooling.
- In order to ensure that the battery clamps firmly, 18650 battery holder using compact battery holder for flat battery measurement!
Technical Parameters:
- Working power supply: DC5V external power supply or 18650 battery (both of them should be prepared by yourself)
- Applicable batteries: Suitable for batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and charging at 4.2V
- Power supply interface: Type-C interface. Power cable should be prepared by yourself (C-port mobile phone cable)
- System language: Chinese and English
- Test quantity: 1-way charging and discharging measurement (right battery only)
- Internal resistance measurement: supported, using DC two-wire method to test internal resistance
- Charging function: supported, 1-way program control for up to about 1A charging; 1-way hardware control with a maximum charge of about 0.5A
- Discharge function: Supported, only 1 channel supports a maximum of about 1A discharge, and it will automatically stop when the condition is met
- Automatic charging and discharging: Supported. The battery is fully charged at the end of automatic mode (stop voltage set to 2.8V or above)
- Cyclic charging and discharging: supported, adjustable for 1-9 cycles
- Status prompt: Supported
- Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V and 3.5V
- Discharge current: Two-way resistors, up to about 1A current, non-adjustable, and independent modification not supported
- Charging voltage: controlled by a dedicated battery charging chip, with a maximum charge of about 0.5A/1A, and a full charge voltage of 4.2V
- Power off saving: only save the set parameters, not the measurement data
- Product net weight: 80g/0.2lb
- Product size: 110 x 88 x 30mm/4.3 x 3.5 x 1.2"
Package Included:
- 1 x Battery Tester
Note:
- Battery is not included in the package.
User Manual:
https://www.banber.com/banber/63f08fc7b2c1a900078b9784
Packaging Details:
- Package size: 153 x 100 x 42mm/6 x 3.9 x 1.7" (corrugated paper box)
- G.W.: 0.15kg/0.3lb
Features:
- It can measure single-channel internal resistance and capacity;
- It supports charging, and up to 9 charge and discharge cycles are supported in automatic mode
- Stop discharge voltage is adjustable in 11 steps, i.e. 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V and 3.5V
- Using DC two-wire method to test internal resistance
- Chinese and English can be switched
- The maximum charge and discharge current is about 1A
Attention:
- During use, charging and discharging process will generate local high temperature, please ensure that the use of the environment is open and uncovered. It is better if a fan can be added for cooling.
- In order to ensure that the battery clamps firmly, 18650 battery holder using compact battery holder for flat battery measurement!
Technical Parameters:
- Working power supply: DC5V external power supply or 18650 battery (both of them should be prepared by yourself)
- Applicable batteries: Suitable for batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and charging at 4.2V
- Power supply interface: Type-C interface. Power cable should be prepared by yourself (C-port mobile phone cable)
- System language: Chinese and English
- Test quantity: 1-way charging and discharging measurement (right battery only)
- Internal resistance measurement: supported, using DC two-wire method to test internal resistance
- Charging function: supported, 1-way program control for up to about 1A charging; 1-way hardware control with a maximum charge of about 0.5A
- Discharge function: Supported, only 1 channel supports a maximum of about 1A discharge, and it will automatically stop when the condition is met
- Automatic charging and discharging: Supported. The battery is fully charged at the end of automatic mode (stop voltage set to 2.8V or above)
- Cyclic charging and discharging: supported, adjustable for 1-9 cycles
- Status prompt: Supported
- Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V and 3.5V
- Discharge current: Two-way resistors, up to about 1A current, non-adjustable, and independent modification not supported
- Charging voltage: controlled by a dedicated battery charging chip, with a maximum charge of about 0.5A/1A, and a full charge voltage of 4.2V
- Power off saving: only save the set parameters, not the measurement data
- Product net weight: 80g/0.2lb
- Product size: 110 x 88 x 30mm/4.3 x 3.5 x 1.2"
Package Included:
- 1 x Battery Tester
Note:
- Battery is not included in the package.
User Manual:
https://www.banber.com/banber/63f08fc7b2c1a900078b9784
Packaging Details:
- Package size: 153 x 100 x 42mm/6 x 3.9 x 1.7" (corrugated paper box)
- G.W.: 0.15kg/0.3lb
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
