4-channel car amplifier

100 watts RMS x 4 at 4 ohms

200 watts RMS x 4 at 2 ohms

400 watts RMS x 2 bridged at 4 ohms

Class D amp technology

frequency response: 10-22,000 Hz

variable high-pass filters (Off/50-500 Hz, 12 dB/octave)

preamp inputs only

wiring, fuse, and hardware not included with amplifier:

4-gauge power and ground leads and an 80A fuse recommended

dimensions: 9.42"W x 2.01"H x 6.09"D

What's in the box

4-Channel amplifier

Four 5/8" screws

Three Allen keys (3mm/ 2.5mm/ 2mm)

Quickstart guide

 Compact, power-packed, and affordable

System versatility

The EPICFOUR can power four 2-ohm high-performance speakers with 200 watts RMS each. Or, you can set up a EPICFOUR to power two regular speakers with 100 watts each while powering a 4-ohm sub with 200 watts from bridged channels. The amplifier was designed for full-range speakers as it features only high-pass crossover filters to eliminate unwanted low-frequencies from the mix. The amp only has preamp inputs, so you'll need a line output converter or a similar device to connect to a factory system if you're not using an aftermarket radio with RCA outputs.