eBay

Feature:

1. This carefully designed electret microphone amplifier can add a lot to your project
2. Fully assembled and tested circuit board with soldered 20-20KHz electret microphone
3. The product has excellent power supply noise suppression
4. Suitable for voice converters, audio recording / sampling and audio response projects
5. On the back, we include a small trimmer potentiometer to adjust the gain

Specification:

Item Type: Microphone Amplifier Module
Description:
1. This carefully designed electret microphone amplifier can add a lot to your project
2. Fully assembled and tested circuit board with soldered 20-20KHz electret microphone
3. Has excellent power supply noise suppression
4. Most suitable for projects using FFT, such as voice converters, audio recording / sampling and audio response projects
5. On the back, we include a small trimmer potentiometer to adjust the gain. You can set the gain from 25 times to 125 times
6. Drop to about 200mVpp (normally, about 6 inches away), ideal for connecting to something that requires "line level" input without clipping, or up to about 1Vpp
7. Very suitable for reading from microcontroller ADC. The output is rail-to-rail, so if the sound gets louder, the output can 5Vpp!
Use:
Connect GND to ground and connect VCC to 2.4-5VDC. For best performance, use the “quietest” power supply available. The audio waveform will be output from the OUT pin. The output will have a DC bias of VCC / 2, so when it is completely quiet, the voltage will be a stable VCC / 2 volts (DC coupled). If the audio device you use requires AC-coupled audio, place a 100uF capacitor between the output pin and the input of the device. If you are connecting to an audio amplifier with a differential input or including decoupling capacitors, you do not need a 100uF capacitor.
The output pins are not designed to drive speakers or the smallest in-ear headphones, but to connect them directly to the speakers, so you need an audio amplifier (for example, a 3.7W stereo amplifier). If connected to a microcontroller pin, no amplifier or decoupling capacitor is needed-connect the OUT pin directly to the microcontroller ADC pin

Package List:

1 x Microphone Amplifier Module

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg