Item specifics
-
Condition
-
-
Brand
-
Unbranded
-
Jewelry Tools & Equipments Type
-
Engraving Tools
-
Jewelry tools and equipment categories
-
Engraving Tools
-
Type
-
Jewelry Tools
-
Product name
-
Inside Ring Engraving Machine
-
Quality
-
High-quality
-
Engraving height
-
1-2mm
-
UPC
-
Does not apply
Item description from the seller
With special accessories, the lettering is as easy as handwriting.
Engraving font: 2mm maximum and 1.5mm minimum
Body size: 150mm deep × 210mm wide × 378mm high Package size: 480mm x 320mm x 310mm Weight: 6.5KG
Configuration: a host and a lettering plate are used for engraving the inner hole of the ring. It is equipped with a chassis with Arabic numerals and English letters. You can engrave your own English name, pinyin or commemorative date on the inner hole of the ring, as well as the main components of the product, such as PT750, 18K, 14K, 950, etc
How to use it: put the ring on the machine, control the pen on the top of the disk by hand, select the letter or number you want on the disk, and then trace it, just like we wrote the hard pen calligraphy tracing book when we were young. It is very easy, and the machine on the ring will engrave the words you want.
Note: 1. There are letters and numbers on the disc, so only English or numbers can be engraved, not Chinese characters.
2. It doesn't have to be traced hard. The machine on it will automatically work and be engraved on the ring. Because the machine above uses very small needles.
3. This lettering machine is of the point vibration type, and it can be used point by point. We often see the words "S925" carved on the ring in this way.
Note:
1、 This product is equipped with a chassis with Arabic numerals and English letters. You can engrave your English name and date on the inner wall of the ring, such as DZQ 2008, 14K, 18K, S925, etc.
2、 There are only letters and numbers on the disk, so only English or numbers can be engraved, not Chinese characters.
Product parameters:
Product name: engraving machine for ring inner ring
Font size: 1.5mm 2mm
Body size: length: 260mm * width: 230mm * height: 420mm
Package size: length: 300mm * width: 270mm * height: 450mm
Net weight of machine: 5.5kg
Weight after packaging: 6.5kg
Engraving font: 2mm maximum and 1.5mm minimum
Body size: 150mm deep × 210mm wide × 378mm high Package size: 480mm x 320mm x 310mm Weight: 6.5KG
Configuration: a host and a lettering plate are used for engraving the inner hole of the ring. It is equipped with a chassis with Arabic numerals and English letters. You can engrave your own English name, pinyin or commemorative date on the inner hole of the ring, as well as the main components of the product, such as PT750, 18K, 14K, 950, etc
How to use it: put the ring on the machine, control the pen on the top of the disk by hand, select the letter or number you want on the disk, and then trace it, just like we wrote the hard pen calligraphy tracing book when we were young. It is very easy, and the machine on the ring will engrave the words you want.
Note: 1. There are letters and numbers on the disc, so only English or numbers can be engraved, not Chinese characters.
2. It doesn't have to be traced hard. The machine on it will automatically work and be engraved on the ring. Because the machine above uses very small needles.
3. This lettering machine is of the point vibration type, and it can be used point by point. We often see the words "S925" carved on the ring in this way.
Note:
1、 This product is equipped with a chassis with Arabic numerals and English letters. You can engrave your English name and date on the inner wall of the ring, such as DZQ 2008, 14K, 18K, S925, etc.
2、 There are only letters and numbers on the disk, so only English or numbers can be engraved, not Chinese characters.
Product parameters:
Product name: engraving machine for ring inner ring
Font size: 1.5mm 2mm
Body size: length: 260mm * width: 230mm * height: 420mm
Package size: length: 300mm * width: 270mm * height: 450mm
Net weight of machine: 5.5kg
Weight after packaging: 6.5kg
