Pureco Chalk Finish - Mermaid - Furniture Paint

Pureco Chalk Finish is a beautiful water-based paint full of natural pigments and produces a velvety smooth finish. Ideal for furniture, decor or canvas this paint can be used on just about anything. Australian Made & Owned Water-based Eco Friendly No VOC Can be applied using a Brush, Roller or Spray Gun. Can be thinned up to 30% with water 30 minute to 1-hour dry time, re-coat 2 hours. High coverage - approximately: 200ml = 2-3 square meters, 600ml = 7-8 square meters It has incredible coverage - most colours only require 2-3 coats (please note some colours may require up to 4 coats to achieve full coverage) Compatible with the complete Pureco Range - always test prior to use in conjunction with products outside of the Pureco range. How to use: Before beginning any other prep or painting ALWAYS clean your piece with HOT soapy water - we highly recommend you use PURECO LEMON MYRTLE CLEANER. This will ensure it is free from grease, oil, dirt, mould and old cleaning products, helping you produce a beautiful durable finish that is stable and will last the test of time and use. Unpainted and previously painted surfaces: Gloss, laminate, or ultra-smooth (modern) surfaces scruff sand with 80grit sandpaper to give the surface tooth and apply one coat of PURECO BASE & BLOCKER to further help with adhesion. High-Tannin Wood/Wood that bleeds: A primer may need to be used, as Pureco Chalk Finish is porous it is more likely to draw the tannins out resulting in bleeding through. We recommend you apply one coat of PURECO BASE & BLOCKER or spot treat any bleed as it occurs. Always STIR your paint well, and ensure the brush/roller or sprayer is clean and ready for use. Apply 2-4 coats, in most cases, 2 coats are all you need. Sanding between coats is completely optional to help smooth brush strokes, Pureco Chalk Finish will self-level to an extent however chalk paint will naturally hold more texture. We recommend using a high-quality synthetic brush like our brushes (find them HERE) Pureco Chalk Finish is a form of chalk paint and is porous, it needs to be sealed to protect its finish, use one of Purecos finishes: FURNITURE WAX, HEMP FINISHING OIL, SEALERS or STAIN & GLAZE. ALL ORDERS ARE SHIPPED WITH FULL PRODUCT INFORMATION AND INSTRUCTIONS. Sourced, mixed, poured & packaged in Newcastle, Australia, Pureco is Australian Owned & Made. Sourcing only the best Australian ingredients to create an amazing range of Eco-Friendly Certified, No VOC [Volatile Organic Compound], Cruelty-Free, Non-Toxic, Child Safe, Solvent Free, Water-Based products. Although Pureco may be new, Laurie has years of experience in the painting and finishing industry and brings us products that we know and love with her very own twist. **PLEASE SEE PHOTOS FOR ARTISTS NAME/BUSINESS. WE THANK ALL CONTRIBUTORS FOR ALLOWING US TO SHOWCASE YOUR BEAUTIFUL WORK.

Pureco Chalk Finish - Mermaid - Furniture Paint

Pureco Chalk Finish is a beautiful water-based paint full of natural pigments and produces a velvety smooth finish. Ideal for furniture, decor or canvas this paint can be uséd on just about anything.

Australian Made & Owned
Water-based
Eco Friendly
No VOC
Can be applied using a Brush, Roller or Spray Gun.
Can be thinned up to 30% with water
30 minute to 1-hour dry time, re-coat 2 hours.
High coverage - approximately: 200ml = 2-3 square meters, 600ml = 7-8 square meters

It has incredible coverage - most colours only require 2-3 coats (please note some colours may require up to 4 coats to achieve full coverage)

Compatible with the complete Pureco Range - always test prior to use in conjunction with products outside of the Pureco range.

How to use:

Before beginning any other prep or painting ALWAYS clean your piece with HOT soapy water - we highly recommend you use PURECO LEMON MYRTLE CLEANER. This will ensure it is free from grease, oil, dirt, mould and old cleaning products, helping you produce a beautiful durable finish that is stable and will last the test of time and use.

Unpainted and previously painted surfaces: Gloss, laminate, or ultra-smooth (modern) surfaces scruff sand with 80grit sandpaper to give the surface tooth and apply one coat of PURECO BASE & BLOCKER to further help with adhesion.

High-Tannin Wood/Wood that bleeds: A primer may need to be uséd, as Pureco Chalk Finish is porous it is more likely to draw the tannins out resulting in bleeding through. We recommend you apply one coat of PURECO BASE & BLOCKER or spot treat any bleed as it occurs.

Always STIR your paint well, and ensure the brush/roller or sprayer is clean and ready for use.
Apply 2-4 coats, in most cases, 2 coats are all you need. Sanding between coats is completely optional to help smooth brush strokes, Pureco Chalk Finish will self-level to an extent however chalk paint will naturally hold more texture. We recommend using a high-quality synthetic brush like our brushes (find them HERE)
Pureco Chalk Finish is a form of chalk paint and is porous, it needs to be sealed to protect its finish, use one of Purecos finishes: FURNITURE WAX, HEMP FINISHING OIL, SEALERS or STAIN & GLAZE.

ALL ORDERS ARE SHIPPED WITH FULL PRODUCT INFORMATION AND INSTRUCTIONS.

Sourced, mixed, poured & packaged in Newcastle, Australia, Pureco is Australian Owned & Made. Sourcing only the best Australian ingredients to create an amazing range of Eco-Friendly Certified, No VOC [Volatile Organic Compound], Cruelty-Free, Non-Toxic, Child Safe, Solvent Free, Water-Based products. Although Pureco may be new, Laurie has years of experience in the painting and finishing industry and brings us products that we know and love with her very own twist.