🚁 HS-P136M Industrial-Grade FPV Drone – Power, Precision, Performance
Take your aerial operations to the next level with the HS-P136M, a high-performance 6-rotor FPV drone engineered for industrial-grade payloads and long-range missions. Designed with T300 carbon fiber, this UAV delivers strength and agility in even the most demanding conditions.
⚙️ Key Features:
-
High Payload Capacity: Supports up to 9.5kg max payload, ideal for industrial equipment, delivery modules, or sensors.
-
Extended Flight Range: Over 10km remote control distance, using ELRS 915MHz protocol.
-
Fast and Agile: Achieve speeds up to 140km/h with a 360° max tilt angle, perfect for swift deployment.
-
Efficient Hover Times: 12 min under rated load; more than 30 min without payload.
-
Weather-Ready: Withstands wind up to level 6, operates in temperatures from -10°C to 40°C.
-
Powerful Motor System: 6 high-performance 440KV motors (1569W each) for stable thrust.
-
Advanced Electronics:
-
Flight Controller: STM32F405 + ICM42688-P Gyro, Betaflight firmware.
-
ESC: 80A continuous current, telemetry supported.
-
PDB: 100A with built-in BECs and ammeter.
-
-
Camera & Video Transmission:
-
1500TVL low-light camera with PAL/NTSC support.
-
VTX: Up to 3W, 72 channels, 5.8GHz (customizable).
-
Antenna: 3dB gain with SWR ＜1.5, RHCP polarization.
-
-
Optional GPS: Accurate return-to-home and hovering capability with optional module.
🔋 Recommended Battery (Not Included):
-
Type: LiPo 8S1P
-
Capacity: 7500mAh
-
Discharge Rate: 70C
-
Quantity: 2 packs suggested
📦 Package Includes:
-
1x HS-P136M Drone Frame with Motors
-
6x ESC (80A)
-
1x PDB
-
6x Propellers (3CW + 3CCW)
-
1x Flight Controller (pre-installed)
-
1x VTX module (5.8GHz 3W)
-
1x ELRS Receiver (915MHz)
-
1x FPV Camera (1500TVL)
-
1x VTX Antenna
-
1x Adapter Cable
-
Screws, hardware & standard mounting accessories
(Battery & GPS module not included unless otherwise stated)
🛠️ Applications:
-
Long-distance FPV flying
-
Aerial surveying and mapping
-
Payload delivery systems
-
Industrial inspections
-
Custom development projects
| Working Frequency: 2400 MHz Protocol: CRSF Maximum Refresh Rate: 500 Hz Return Power: 100 mW Operating Voltage: DC 4.5–5 V Weight: 0.42 g (excluding antenna) Dimensions: 10 × 10 × 3 mm |
REC2400SM Receiver x1 Connection Cable x4 T-Type Antenna x1 Heat Shrink Tube x2 |
| Input Voltage: DC 10.0–49.0V @ MAX 50A Battery Types: LiPo, LiHV, LiFe, Li-ion, LTO (1–8S), NiMh (1–20S), Pb (1–15S) Balancing Current: 2000 mA @ 2–8S Balancing Accuracy: <0.005 V Charging Power: 0.1–30A @ 800W×2 (Asynchronous Mode), 0.1–50A @ 1600W (Synchronous Mode) Discharging Power: 0.1–10A @ 40W×2 (Normal Discharge), 0.1–30A @ 800W×2 (Recycling Mode) USB-C Output: 20V @ 65W or Firmware Upgrade (PD / QC / AFC / FCP / SCP / PE / SFCP / VOC) Battery Voltage: 1.0–5.0V @ 1–8S Battery Resistance: 1–100mΩ @ 1–8S Display: LCD IPS 3.5" 480×320 resolution Touch Screen: Capacitive Product Size: 130 × 97 × 42 mm Product Weight: 450 g Package Size: 140 × 110 × 50 mm Package Weight: 700 g Applicable Model: HS-P134M / HS-P136M battery (requires ADP450 RC adapter) |
M8D Charger x1 XT90 Input Cable x1 Type-C Data Cable x1 Screen Protector x1 Quick Start Manual x1 |
| Input Voltage: AC 100–240V 50/60Hz Input Current: Max 5.0A Output Voltage: Max 24.0V Output Current: Max 19.0A Connector: XT60 Male Operating Temperature: -10°C to 40°C Product Size: 187.4 × 91.5 × 57.0 mm Product Weight: 800 g Package Size: 221.5 × 172.0 × 83.0 mm Package Weight: 1100 g LED Indicator: Off – Short circuit, Overheat; Flashing – Overcurrent, Overload, Overvoltage Applicable Model: BC-M8D (requires BC-M8D RC charger) |
ADP450 Power Supply x1
AC Input Power Cable x1 XT60 Female-to-Female Output Cable x1 |
| Maximum Output Power: <33 dBm Weight: 55 g Antenna Connector: SMA (outer thread, inner hole) Input Voltage: 5–13V (recommended 5–9V) Working Frequency Range: 2400 MHz Dimensions: 73 × 53 × 32 mm |
High-Frequency Module x1 High-Frequency Antenna x1 |
| Dimensions: 183 × 212 × 66 mm Weight: 750 g Built-in Transmit Module: 4-in-1 multi-protocol RF module (CC2500, CYRF6936, A7105, NRF2401) Transmission Frequency: 2.400–2.480 GHz Transmission Power: Max 20 dBm Antenna Gain: 2 dB Operating Voltage: DC 6.6–8.4V Control Distance: Max 2000 m Open-source Firmware: EdgeTX Channels: Up to 16 (depending on receiver) Display: 4.3" TFT full-color screen (480×272 resolution) Gimbals: Hall sensor Recommended Battery: 18650 2600mAh (2 pcs, pointed tip) Recommended RF Module: LNB-ES900 / TX 915MHz |
Remote Controller x1 Antenna x1 User Manual x1 Type-C Data Cable x1 Neck Strap x1 Packaging Box x1 |
| Display: OLED 1280×720 Field of View (FOV): 42° Aspect Ratio: 4:3 / 16:9 Diopter Adjustment Range: -6 to +2 Interpupillary Distance (IPD): 58–71 mm Receiver: 5.8 GHz 48CH Diversity Receiver DVR Recording: 60 FPS MJPEG Input Voltage: 2S–6S LiPo HDMI Input: Supported Languages: 10 languages Head Tracking: 3-axis accelerometer & 3-axis gyroscope Recording Storage: Max 128 GB supported Product Size: 230 × 146 × 90 mm Product Weight: 297 g Recommended Battery: 4S 1000mAh 10C |
FPV Goggles x1 Receiver Module x1 Faceplate x2 (Wide and Narrow) Foam Pad x1 Zipper Storage Case x1 Power Cable x1 Head Tracking Data Cable x1 5.8GHz 2dB Antenna x2 AV Cable x1 USB-C Data Cable x1 User Manual x1 |
| Model: GPS-M10-WK Size: 20 × 20 × 8 mm Module Type: GPS + Beidou Positioning Accuracy: 1.5 m Speed Accuracy: 0.05 m/s Application: Drone positioning Hot Start Time: 1 s Cold Start Time: 26 s |
GPS-M10-WK GPS Module x1 SH1.0-6P 20cm Cable x1 |
