Specification:

• Material: Aluminum alloy
• Table length,width,and height: 6.1"x9.05"x5.11"=155x230x130mm
• Travel X-axis: 3.14"=80mm
• Travel Y-axis: 2.63"=67mm
• Base hole spacing: 4.13"=105mm
• Max jaw opening: 2.95"=75mm
• One Round scale:1.5mm;
• Gross weight of the vise: 6.3LBS=2.9KG

Advantages:

• Equipped with detachable rubber jaw protective sleeve,clamping is more stable,tight,and anti-skid.
• Thickened aluminum alloy base,with thick and wear-resistant screw rods,ensuring high accuracy and high hardness in the smallest space.
• The force bar of the handwheel can rotate 360 degrees to adjust the width of the vise clamp.
• The handwheel has a marked 0.05mm increment to achieve maximum accuracy.
• The stroke for one revolution is 1.5mm,A ring=1.5mm
• Equipped with 2 rotating crank handles for adjusting the vise from front to back and from left to right,with bolt fixing slots for fixing.

Application:

• This cross slide vise is mainly suitable for small mills and drilling machines, and can also be applied to other suitable machine tools, such as drilling machine brackets,desktop drilling machines,woodworking and metal processing etc.

Instructions for use:

User manual (see manual for details)

1. Open the packaging and remove the accessories; Install the anti slip pad on the jaw and install the handle
2. Fix the area where cross flat nose pliers are required
3. Adjust the X-axis and Y-axis to the appropriate position, open the pliers and place the item in place, and clamp the item for use