|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4400 PSI Pressure Washer Pump Power Washer Pump 1" Shaft Horizontal 4 GPM
Wide Compatibility: Designed with a standard SAE bolt pattern, our parts washer pump is compatible with various gas pressure washers with horizontal engines, including Simpson MorFlex models 40224, 40225, 40226, and Santoprene model 41182. To ensure compatibility, be sure to match engine orientation, PSI, GPM, engine shaft diameter, and current pump inlet and outlet connection.
High-Pressure Resistant Structure: Say goodbye to impurities damaging your plunger! Our power washer pump strengthens plunger hardness to improve wear resistance and prolong the life of water/oil seals. The one-piece pump head made of forged brass material offers a better sealing effect, high strength, and increased durability.
Easy Oil Level Inspection: Checking the oil level has never been easier with our replacement power washer pump's sight glass and advanced oil seal technology – no need to use an oil dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
4000 PSI Pressure Washer Pump Power Washer Pump 1" Shaft Horizontal 4 GPM
Max Volume 4 Gallon Per Minute
Max Discharge Pressure 4000PSI
Max Pump Speed 3,400 RPM
Adjustable Unloader
Shaft 1" Hollow
Max Horsepower 13.75GPH
Max Fluid Temp 140 Degrees
Soap Injector
Inlet Port 3/8" FPT
Outlet Port 3/8" NPT, also equipped with female disconnect.
3000 PSI Pressure Washer Pump Power Washer Pump 1" Shaft Horizontal 4 GPM
Material:Stainless Steel, Aluminum
Style:Pressure Washer
Power Source:Wind Powered
Maximum Flow Rate:
4 Gallons Per Minute
3,000 psi at 4.0 gpm
9 hp at 3,400 rpm
1-inch hollow shaft
horizontal mount direct-drive
6.35 mm keyway
3/4-inch standard garden hose inlet
3/8-inch quick-connect outlet
50°C (122°F) max. inlet water temperature
3000 PSI Pressure Washer Pump Power Washer Pump 3/4" Shaft Horizontal 2.5 GPM
Engine Type: 3/4" Shaft Horizontal
Max Pressure (psi/bar): 3000/200
Max Flow Rate (gallon/min): 2.5GPM
Engine HP required: 5.5 HP (Minimum)
Head Material: Aluminum
Bearing: Double Bearing
Plunger: Stainless Steel
Plunger seals: Oil Seals
Shaft Depth: 2 5/8"
Hole Distance to hole : 2 9/16”
Keyway Size: 3/16"
Connection: Inlet--3/4'' 14NH Garden Hose (Not 3/4 in. - 11 1/2 NH)
Outlet--M22x1.5-14mm
Rated RPM: 3400
Max. Water Supply Temperature: 104°F
Self suction: Yes
Comes with Built-In Unloader
Built-In Chemical Injector
Comes with a FREE Thermal Relief Valve
⚠ Will not fit Shafts By Older GC160 Honda Engines.
Compatible with 3/4" Horizontal Shaft Pressure Washer & Engine: Up to 3000 PSI. If you don't see your model below, just message us and we will confirm it for you!
Homelite: 308418007, 309515003, 308418004, 308653057, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E, HL252300, UT80953E
Honda: GC190, GC160 (* 7/8" Shaft Engine is not Compatible)
Simpson: MS60753 MS60852 MS60753, MS60788, MS60850, MS60799,MS61043 PS60841 MSH3125 PS80903b ALH3225
Karcher: K2400HH, G2400HH, G2800OH, G3000OH, G3050OH, G2600OR, G2650HH, G2800OH, G3025OH, G3000BH G3025BH
PowerStroke: PS80522, PS80903, UT80522, UT80953, PS80903A, 30841800
Generac: 580.762011, 01675, 01675-0,1671,1675, 1293,1330, AXD2524GT-22mm, G24H,BXD2528, BXD2527G,598759870, 598859880
Briggs Stratton: 020204,020208,020209,020212, 020216 020220 ,020224, 020251, 020263 020275,020309
Troy Bilt: 020200, 020208,020241, 01904, 020242, 020209,194106GS, 01042
AR: RMV2.5G30-EZ, RMV25G30D-PKG
Ryobi: RY80533
Others: Exh2425, 520011, 7106900, 189943GS, 193486GS, 90028, 7108379,7106900 ,580752070, RD80947, RD80955
2700 PSI Pressure Washer Pump Power Washer Pump 7/8" Shaft Horizontal 2.4 GPM
2400-2700 PSI
2.4 GPM Flow Rating
Thermal Release Valve Included
Fits 7/8" Vertical Shaft Crank Engines
Replaces Part Numbers:
Replacement for AR: RMW2G24 - PK17909 - 510003 - B3468AGS - B1262 - B5685A - B3468A - RMW2G24-SK - B3468A -2300PSIL - 189970GS - 189940GS - 192308GS - 194258GS - 193568GS - 191692GS - 189943GS - 191693GS - 200200GS - 199735GS - 198421GS - 194216GS - 194258GS - 197300GS - 198421GS - 197300GS - 199735GS - 202605GS - 202274GS - 205816GS - 206383GS - 202605GS - 200303GS - Many More
| Item Specifics | |
|---|---|
| Type | Pressure Washer Pump |
| Brand | ALL-CARB |
| Horsepower | 9-15 HP |
| Maximum Pressure | 4400 psi/4000psi/3000psi |
| Max Flow | 4 GPM |
| Shaft Diameter | 1"/25.4 mm |
| Manufacturer Warranty | 1 Year |

We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Backyard-ly

New Pressure Washer Pump 4 GPM 1" Shaft Horizontal 4400 psi/4000psi/3000psi
4400 PSI Pressure Washer Pump Power Washer Pump 1" Shaft Horizontal 4 GPM Wide Compatibility: Designed with a standard SAE bolt pattern, our parts washer pump is compatible with various gas pressure washers with horizontal engines, including Simpson MorFlex models 40224, 40225, 40226, and Santoprene model 41182. To ensure compatibility, be sure to match engine orientation, PSI, GPM, engine shaft diameter, and current pump inlet and outlet connection. High-Pressure Resistant Structure: Say goodbye to impurities damaging your plunger! Our power washer pump strengthens plunger hardness to improve wear resistance and prolong the life of water/oil seals. The one-piece pump head made of forged brass material offers a better sealing effect, high strength, and increased durability.
4000 PSI Pressure Washer Pump Power Washer Pump 1" Shaft Horizontal 4 GPM Max Volume 4 Gallon Per Minute Max Discharge Pressure 4000PSI Max Pump Speed 3,400 RPM Adjustable Unloader Shaft 1" Hollow Max Horsepower 13.75GPH Max Fluid Temp 140 Degrees Soap Injector Inlet Port 3/8" FPT Outlet Port 3/8" NPT, also equipped with female disconnect.
3000 PSI Pressure Washer Pump Power Washer Pump 1" Shaft Horizontal 4 GPM Material:Stainless Steel, Aluminum 4 Gallons Per Minute
3000 PSI Pressure Washer Pump Power Washer Pump 3/4" Shaft Horizontal 2.5 GPM Engine Type: 3/4" Shaft Horizontal Max Pressure (psi/bar): 3000/200 Max Flow Rate (gallon/min): 2.5GPM Engine HP required: 5.5 HP (Minimum) Head Material: Aluminum Bearing: Double Bearing Plunger: Stainless Steel Plunger seals: Oil Seals Shaft Depth: 2 5/8" Hole Distance to hole : 2 9/16” Keyway Size: 3/16" Connection: Inlet--3/4'' 14NH Garden Hose (Not 3/4 in. - 11 1/2 NH) Outlet--M22x1.5-14mm Rated RPM: 3400 Max. Water Supply Temperature: 104°F Self suction: Yes Comes with Built-In Unloader Built-In Chemical Injector Comes with a FREE Thermal Relief Valve ⚠ Will not fit Shafts By Older GC160 Honda Engines. Compatible with 3/4" Horizontal Shaft Pressure Washer & Engine: Up to 3000 PSI. If you don't see your model below, just message us and we will confirm it for you! Homelite: 308418007, 309515003, 308418004, 308653057, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E, HL252300, UT80953E Honda: GC190, GC160 (* 7/8" Shaft Engine is not Compatible) Simpson: MS60753 MS60852 MS60753, MS60788, MS60850, MS60799,MS61043 PS60841 MSH3125 PS80903b ALH3225 Karcher: K2400HH, G2400HH, G2800OH, G3000OH, G3050OH, G2600OR, G2650HH, G2800OH, G3025OH, G3000BH G3025BH PowerStroke: PS80522, PS80903, UT80522, UT80953, PS80903A, 30841800 Generac: 580.762011, 01675, 01675-0,1671,1675, 1293,1330, AXD2524GT-22mm, G24H,BXD2528, BXD2527G,598759870, 598859880 Briggs Stratton: 020204,020208,020209,020212, 020216 020220 ,020224, 020251, 020263 020275,020309 Troy Bilt: 020200, 020208,020241, 01904, 020242, 020209,194106GS, 01042 AR: RMV2.5G30-EZ, RMV25G30D-PKG Ryobi: RY80533 Others: Exh2425, 520011, 7106900, 189943GS, 193486GS, 90028, 7108379,7106900 ,580752070, RD80947, RD80955
2700 PSI Pressure Washer Pump Power Washer Pump 7/8" Shaft Horizontal 2.4 GPM 2400-2700 PSI Replaces Part Numbers: Payment
Shipping
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
We have CA, NJ warehouses and ship items may vary according to the stock.
Returns
30 Days easy returns satisfaction grantee.
Items to be returned must be in original factory condition.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
FeedBack
We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All right reserved. |