Transmission - Capacity 0,95 liter

SILKOLENE V-TWIN SAE 20W-50

A dedicated High Performance 4-stroke oil for V-Twin engines.

Description

SILKOLENE V-TWIN SAE 20W-50 is based on highly refined mineral base oils and performance additives to create a customized engine oil for V-Twin engines. SILKOLENE V-TWIN SAE 20W-50 provides high levels of wear protection, engine cleanliness and protects engine components from deposits, varnish, and corrosion. SILKOLENE V-TWIN SAE 20W-50 is shear-stable and contains detergents, dispersants and EP additives to provide excellent engine cleanliness and minimum component wear.

Application

SILKOLENE V-TWIN SAE 20W-50 was specifically formulated for use in Harley Davidson engines and other metric V-Twin engines, where an SAE 20W-50 product is specified. SILKOLENE V-TWIN SAE 20W- 50 is miscible and compatible with conventional, branded engine oils. However, mixing with other engine oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended when converting to SILKOLENE VTWIN SAE 20W-50. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

Advantages

? Specifically designed for 4-stroke engines fitted with wet clutches.

? Outstanding wet clutch performance as per JASO MA2 standard leading to smooth gear changes and maximum power transmission.

? Good gear wear and pitting protection.

? Good engine wear protection.

? Good prevention of high-temperature deposits resulting in a clean engine and long engine life.

? Provides a better corrosion protection, a better oxidation/nitration resistance, and a lower volatility than conventional products.

Specifications

? -

Approvals

? JASO MA2

FUCHS Recommendations

? API SJ / CH-4

TYPICAL CHARACTERISTICS

Density at 15°C -- DIN 51757 -- 0.891 g/ml

Kinematic Viscosity at 40°C -- DIN 51562-1 -- 168.4 mm²/s

Kinematic Viscosity at 100°C -- DIN 51562-1 -- 19.1 mm²/s

Viscosity Index -- DIN ISO 2909 -- 129

CCS Viscosity at -15°C -- ASTM D 5293 -- 7,900 mPas

Closed Flash Point -- ASTM D93 -- 217 °C

Pour Point -- DIN ISO 3016 -- tbc °C

Product Dyeing -- None