This is a high quality Trim gauge,7 kinds of backlight colors
Applications:
Fit for:Cars, trucks, boats, etc.
Description:
Face Color: White
Bezel Materials: Stainless Steel
1. Press the Mode button (less than 1 second) to change the backlight color:Backlight changed in sequence:
red (default) →green → blue → white → yellow → yellow green → orange → Purple → (Automatic).
Automatic:As the gauges was set with the automatic,the backlight will be off for 2 seconds then lighten up,And will switch the backlight color as above sequentially.
2. Press the Mode button (time ≥3s) to access into setting mode,back light flickering for a while, the the dierction of pointer will change inverdely when you press the button.
Indicating Range: UP-DN (0-190Ohms)
Signal: 0-190ohm（Ohm can be customized, if you need other Ohm, please contact us before payment
Operating Current: ≤60mA
Operating Temperature: -30~+75 ℃
Storage Temperature: -40~+85 ℃
Install Diameter: 52mm(2-1/16'')
Grade Of Protection: Completely waterproof
Package Method: Neutral box
Features:
-High Accuracy and Steady Performance.
-Waterproof and Easy To Read.
-Excellent anti-fogging performance.
-316L Stainless steel bezel with curve glass.
-Easy installation with multi-plug socket connection design.
-White Ground Design With 7 colors Backlight
Installation instructions:
1.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 52mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 70mm of the instrument panel at the back of the instrument.
2.After the instrument is mounted in the panel,Screw down with a fixed ring.
3.Connect signal Connect the wire,the instrument housing is directly connected to the 9~32V power supply.
4.Insert wire harness,Firmly locked in the table.
Connection:
Red--+9-32VDC
Orange--Blacklight(+)
Blue--Ground(-)
Package List:
1xTrim Gauge
1xWiring Harness
1x Instruction Manual
