Active PoE Splitter Power Over Ethernet

with USB TYPE A Female

48V to 5.2V 2.4A (Max. 13watt)

Compliant with IEEE802.3af

With 2.5KV isolation

Note:
The product must be used in conjunction with a PoE switch or PoE injector

Power Output Port: USB TYPE A Female.

Output voltage of 5.2V, the maximum output current of 2.4A. Suitable for the Tablet PC or mobile and other DC5V device. 


Note:
When using 80.3af/802.3at standard PoE switch (or injector) to connect this PoE splitter,and the Power Output Port (USB TYPE A Female) is not loaded (unconnected device), the PoE splitter will enter standby mode. Data Output Port (RJ45 Male) will not work at this moment.
To avoid this problem,please use 48V (or 52V) Unsolicited PoE Switch (or Injector), link:
Http://www.ebay.com/itm/191011392732
Http://www.ebay.com/itm/192162843421
Http://www.ebay.com/itm/201897338202
Http://www.ebay.com/itm/192134808637
Http://www.ebay.com/itm/191789795402
Http://www.ebay.com/itm/201509599271

RJ45 female INPUT Port:
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Adapter

Specification:

Compliant with IEEE802.3af
Isolation: 2.5kV
Power Input(RJ45 female):  DC44~57V
Power Output(USB TYPE A Female): DC5.2V 2.4A
Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data Output Port: RJ45 Male
Power Output Port: USB TYPE A Female.
Data Transfer Rate:  10/100Mbps
Devices will be detected before poe input
Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Body size: 80 x 27x 22 mm
DC cable length：165mm
RJ45 Modular Plug cable length：155mm
Weight : 55g

Operation Temperatue:-20℃ ~ 45℃
Storage Temperature:-30℃ ~ 70℃

Notice:
Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter 
to Manual 100Mb/s mode in the management Settings of switches, 
otherwise the power supply may work normally but the network connection will not work,
such as the following switch,
HP 3500-48G-PoE yl Switch (J8693A) 

Notice:

Yellow LED(power) will be light up when micro USB connects to the device.

Green LED(data) never light in any circumstances,two reasons are below,

1.This splitter allows data to input and output through its RJ45 port, but no indicator on this splitter indicates the status of the data transfer. 
Only one power indicator shows the working status of the POE.

2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.


Item Included:

 48V to 5V Active PoE Splitter(USB TYPE A Female) x1