Specification:
The headlight restoration kits can effectively help you remove the scratches of car headlights and solve yellowing, blurring, oxidation and other problems, prolonging the service life of the car headlight.
Operating instructions:
1. Check the damage of the headlight. Common symptoms are: Hairline cracks, yellowing, oxidation, blurring, skinning, scratches and other symptoms.
2. Please stay in a clean, dry and windless environment. Before sanding, cover the entire lamp with protective film and polish the lamp cover with sandpaper until there is no more gloss. Use 180#, 240#, 360#, 600# , 800#, 1200#, wash and cross polish with water from small to large, polish thoroughly and do not skip the perimeter, avoid rework, clean with water after polishing and dry with a towel.
3. Add liquid into the atomising cup (the unused coating liquid can be recovered and a little more can be added accordingly), heat it to steam, turn on the headlight, disconnect the power after atomising, expose it to the sun, wipe it off Rinse the headlight with water and recover the coating liquid.
Included:
1x 100ml repair fluid
1x car charger
1x sandpaper (6 pieces)
1x funnel
1x towel
1x adhesive tape
1x instruction manual
Note:
1. Do not store the product in the sun. Please wear a mask during operation. Pregnant women, children and the elderly must not make contact! The key to headlight repair is polishing!
2. When steaming, the air outlet must not be directed downwards to prevent liquid from dripping onto the lamp. If a drop accidentally occurs, there is no need to panic. Repair other parts first, recycle the coating liquid, wait about 5 minutes and then polish and clean the dripping part again and evaporate the coating.