Title

Excell Desk Tape Dispenser [Dual Core] (ET-19125): 1 in. width (Black)

Product Highlights

• Desktop tape dispenser with a dual-core hub that accepts tape rolls on either a 1-inch or 3-inch core, eliminating the need for two separate dispensers
• Holds tape up to 1 inch wide, with a maximum roll outside diameter of 2-1/4 inches on the 1-inch core and 5 inches on the 3-inch core
• Sand-weighted base allows one-handed dispensing; rubber underside pad protects desks from scratches and reduces sliding during use
• Anti-rust serrated blade delivers a clean, straight cut on each pull; replacement blade is available separately (Excell ET-19125-RP)
• Integrated pencil and pen holder molded into the body keeps a writing instrument within reach; available in black or blue; tape not included

The Excell ET-19125 Dual Core Desk Tape Dispenser holds tape on either a 1-inch or 3-inch core, with both core sizes integrated into a single hub piece. It accepts tape rolls up to 1 inch wide, with a maximum roll outside diameter of 2-1/4 inches on the 1-inch core and 5 inches on the 3-inch core.

A sand-weighted base allows one-handed dispensing: pull the tape, press down on the cutter, and tear off a clean strip without holding the body. A rubber pad on the underside protects the desk surface from scratches and reduces sliding. An anti-rust serrated blade delivers a straight cut on each pull.

An integrated pencil and pen cup is molded into the body to keep a writing instrument within reach for labeling boxes or marking shipments. Tape is not included. Available in black or blue.

Application Instructions

1. Set the dispenser on a flat, clean desk or workbench surface with the cutter blade facing the user.
2. Lift the dual-core hub out of the dispenser arms.
3. Select the side of the hub that matches the core size of your tape roll: the smaller 1-inch end for stationery and office tapes, or the larger 3-inch end for packaging and shipping tapes.
4. Slide the tape roll onto the matching end of the hub so the tape unwinds from the underside toward the cutter.
5. Place the hub with the tape roll back into the dispenser arms.
6. Pull a short length of tape forward and press it down onto the serrated blade so the leading edge is exposed and ready to grab.
7. To dispense, grasp the leading edge of the tape, pull forward to the length needed, then press down and pull against the blade to cut a clean strip.
8. When the roll is empty, lift the hub out, remove the empty core, and load a new roll on the appropriate end.
9. If the blade ever dulls, the cutter is user-replaceable using the Excell ET-19125-RP replacement blade.

Warning: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information

- Construction: plastic
- Weight: 2 pounds 13 ounces