Product Description：

Product Name: Machine Tap

Cone Material: Titanium Plated

Uses: Used In Drilling Machines, Tapping Machines, Automatic Machine Tools, MachiningCenters, Cnc, Milling Machines And Other Machines.

Instruction:  

High-speed Steel Can Significantly Improve The Toughness And Wear Resistance Of The Product. Cobalt-containing Tool Steel Can Significantly Improve The Wear Resistance And Cutting Performance Of Steel. Titanium Increases The Strength And Has Good Heat Resistance, Low Temperature Toughness And Fracture Toughness.

International Standard: M2m6 Handles Are All Pointed (the Pointed Tip Can Be Self-ground) M8 And Above Are All Flat

Note: Due To The High Hardness Of High-speed Steel Machine Taps, Hand Tapping And Electric Drill Tapping Are Not Recommended.

When Tapping, Insert The Head Cone First To Make The Center Line Of The Tap Consistent With The Center Line Of The Drilling

Rotate The Two Hands Evenly And Apply A Little Pressure To Make The Tap Enter The Knife, No Need To Add Pressure After The Knife Is Entered

Each Time The Tap Is Turned, It Is Reversed By About 45° To Cut Off The Chips, So As Not To Block

If The Tap Is Difficult To Rotate, Do Not Increase The Rotating Force, Otherwise The Tap Will Break