Customise your world with our high-quality heat transfer vinyl name decals – perfect for personalising t-shirts, and other items of clothing.
Choose from a wide range of glitter gem colours or sleek matte colours. Each design is professionally cut using a bold, easy-to-read uppercase font. These are ideal for gifts, events, or simply adding a personal touch to your everyday items.
PLEASE NOTE:
- 1 name or word per sticker
- 8 character limit per purchase
- If your name or word is longer than 8 characters, please order two stickers
NOT SUITABLE FOR SCHOOL BAGS unless they are specifically designed to accept iron on transfers.
Your item must be 100% Polyester or 100% Cotton, mixes or variants are not suitable.
If you continue to purchase for other fabrics you accept 100% responsibility and no refunds will be given!
Easy to apply – no special tools needed!
Iron-On Transfer
Application Guide
Follow
these steps carefully to achieve the best results with your transfer:
1. Prepare Your Fabric
- Place your fabric on a hard,
heat-resistant surface (avoid padded ironing boards, as they reduce
pressure).
- Preheat your iron to a high
setting, Do not use steam.
- Press the fabric for 10–15
seconds to remove any moisture or wrinkles.
2. Position the Transfer
- Place the transfer on your
fabric with the shiny clear sheet facing up (the vinyl side
touching the fabric).
- Cover the transfer with parchment
paper or a Teflon sheet to protect both the fabric and the transfer.
3. Apply Heat
- Using medium-firm
pressure, press the iron on top of the covered transfer for 15–30
seconds.
- Move the iron slowly if the
transfer is larger than the plate, overlapping slightly to ensure full
coverage.
4. Peel the Clear Sheet
- Allow the transfer to cool
for just a few seconds, then very slowly begin peeling the clear sheet
from one corner.
- If you notice the vinyl
lifting:
- Lay the clear sheet back
down.
- Re-cover with parchment
paper or Teflon sheet.
- Press again for another 15
seconds.
- Repeat this process until
the transfer adheres fully.
5. Adjusting Heat if Needed
- Every iron is slightly
different. If the vinyl still doesn’t stick after repeating the press, increase
your iron’s temperature slightly and press again.
- Always test cautiously when
adjusting heat to avoid scorching delicate fabrics.
6. Final Press for Durability
- Once the clear sheet has
been fully removed, cover the transfer again with parchment paper or
Teflon sheet.
- Press for an additional 5–10
seconds to seal the edges and improve durability.
Important Safety & Care Tips
- Take care when peeling: The transfer and sheet may
still be hot. Peel slowly to avoid lifting the design or burning your
fingers.
- Never let the iron touch the
vinyl directly—always
use parchment paper or a Teflon sheet as protection.
- Wash care: Wait at least 24 hours
before washing. Wash inside out, on a cool setting. Avoid tumble
drying or ironing directly over the transfer.
Add your personal flair to any project with style that lasts!
Customise your world with our high-quality heat transfer vinyl name decals – perfect for personalising t-shirts, and other items of clothing.
Choose from a wide range of glitter gem colours or sleek matte colours. Each design is professionally cut using a bold, easy-to-read uppercase font. These are ideal for gifts, events, or simply adding a personal touch to your everyday items.
PLEASE NOTE:
- 1 name or word per sticker
- 8 character limit per purchase
- If your name or word is longer than 8 characters, please order two stickers
NOT SUITABLE FOR SCHOOL BAGS unless they are specifically designed to accept iron on transfers.
Your item must be 100% Polyester or 100% Cotton, mixes or variants are not suitable.
If you continue to purchase for other fabrics you accept 100% responsibility and no refunds will be given!
Easy to apply – no special tools needed!
Iron-On Transfer
Application Guide
Follow
these steps carefully to achieve the best results with your transfer:
1. Prepare Your Fabric
- Place your fabric on a hard,
heat-resistant surface (avoid padded ironing boards, as they reduce
pressure).
- Preheat your iron to a high
setting, Do not use steam.
- Press the fabric for 10–15
seconds to remove any moisture or wrinkles.
2. Position the Transfer
- Place the transfer on your
fabric with the shiny clear sheet facing up (the vinyl side
touching the fabric).
- Cover the transfer with parchment
paper or a Teflon sheet to protect both the fabric and the transfer.
3. Apply Heat
- Using medium-firm
pressure, press the iron on top of the covered transfer for 15–30
seconds.
- Move the iron slowly if the
transfer is larger than the plate, overlapping slightly to ensure full
coverage.
4. Peel the Clear Sheet
- Allow the transfer to cool
for just a few seconds, then very slowly begin peeling the clear sheet
from one corner.
- If you notice the vinyl
lifting:
- Lay the clear sheet back
down.
- Re-cover with parchment
paper or Teflon sheet.
- Press again for another 15
seconds.
- Repeat this process until
the transfer adheres fully.
5. Adjusting Heat if Needed
- Every iron is slightly
different. If the vinyl still doesn’t stick after repeating the press, increase
your iron’s temperature slightly and press again.
- Always test cautiously when
adjusting heat to avoid scorching delicate fabrics.
6. Final Press for Durability
- Once the clear sheet has
been fully removed, cover the transfer again with parchment paper or
Teflon sheet.
- Press for an additional 5–10
seconds to seal the edges and improve durability.
Important Safety & Care Tips
- Take care when peeling: The transfer and sheet may
still be hot. Peel slowly to avoid lifting the design or burning your
fingers.
- Never let the iron touch the
vinyl directly—always
use parchment paper or a Teflon sheet as protection.
- Wash care: Wait at least 24 hours
before washing. Wash inside out, on a cool setting. Avoid tumble
drying or ironing directly over the transfer.
Add your personal flair to any project with style that lasts!
Shipping
We strive to provide same-day shipping for orders placed before 2 p.m. Any orders placed after 3 p.m. will be shipped the following day. You can opt for the delivery option that best fits your needs.
Royal Mail delivery times guide:
1st Class: 1-10 days
2nd Class: 2-10 days
Special Delivery: 1-2 days guaranteed.
To ensure timely delivery, kindly review any personalisation details for accuracy. Any errors in the details could result in delays in shipment.
Returns
Our company offers a 7-day return policy on all items except custom-made or personalised ones. However, if there are any issues, snap a photo, contact our team for assistance, and we'll work to resolve any manufacturing mishaps.
We take pride in our products and services and aim to ensure customer satisfaction. Shop with confidence, knowing we've got your back.
Contact us
If you have any questions, concerns, or feedback, please do not hesitate to contact us. We are always here to help and support you in any way we can. You can reach us by phone or email. A member of our dedicated team will be available to assist you with any inquiries you may have. We value your input and strive to provide the best possible experience for our customers. Thank you for choosing to reach out to us, and we look forward to hearing from you soon.
Applying Our Stickers
Our stickers are suitable for smooth surfaces such as walls, glass, plastic, and wood. Not suitable for clothing or fiber materials. Textured / Rough / Bumpy surfaces are not suitable for stickers. Our stickers are not suitable for balloons as there are far too many issues with the application process!
Use a clean dry cloth with warm water to fully clean the surface you are applying the decal to. Please make sure the surface is FULLY dry and clean before applying the decal. Turn the decal over and rub back and forth a few times with a dry clean cloth to ensure the decal transfers to the application tape. Now SLOWLY peel the application tape off which will bring the decal with it. If any part of the decal doesn’t transfer then stop and slowly rub the reverse of the decal and continue to remove the application tape at the same time.
Now apply the decal to the area you cleaned and ensure it’s straight before applying it fully. Now rub all over with the clean cloth to make sure it is stuck well to the clean surface. Warm up the application tape slightly with a hair dryer and then slowly remove the application tape leaving the decal behind. If you have ordered a decal with small delicate parts then please take your time and you may need to stop several times to assist with transferring the decal to the surface. Once the decal is fully applied you can smooth and dab the decal with a clean cloth to secure it further.
About Us
We are a family-run business based in Redditch, UK
Established in 2018, we've grown so much over the years. From a kitchen table to a fully functional studio!
Initially speciallising in personalised vinyl stickers, we are now delighted to offer you so many other amazing products!
All our products are designed, made, and shipped by us. Our small team takes great pride in our work and are always looking for new opportunities to bring you more amazing, unique gifts.
Thank you for supporting small businesses like us!
