|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features:
Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit
Comes with a Complete Set of Headlights (Driver and Passenger Side)
Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights
Requires no Modification or Drilling
Fitment:
2007-2014 For GMC Sierra
OE Number:
GM2502283,GM2503283
Note:
1.High quality lights.Safety and Durable.
2.DOT/SAT approved for street legal. Safety & Fashion.
3.High grade ABS plastic. For toughness, impact resistance, and heat resistance.
4.Condition: 100% Brand New and High Quality
5.Material: ABS Plastic Housing / Polycarbonate Lens
6.Color: Chrome Housing + Clear Lens
7.100% Brand New!
8.Professional Installation is Highly Recommended.
9.Installation Instruction is NOT Included.
10.Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall.
TIPS:
â‘ .Installation Guide:
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly.
â‘¡.Adjustment Guide:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2.Adjust the headlight individually.Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3.Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4.Test your results.
| Item Specifics | |
|---|---|
| Installation Guide | Not Included; Professional installation is highly recommended |
| Manufacturer Warranty | 5 Years |
| Fitment Type | Direct Replacement |
| Bulbs Included | No |
| Manufacturer Part Number | AUT203677 |
| Quantity | 1 x Pair of Head Lights (Left Driver Side & Right Passenger Side) |
| Beam Type | Low Beam, High Beam |
| Placement on Vehicle | Front, Left, Right |
| Brand | KAC |
| Type | Bulb, Lens, Reflector |
| Headlight Style | Factory |
| Housing Color | Chrome (Crystal) |
| Lens Color | Clear |
| Notes | Does Not Include Bulbs & Wiring - Reuse Your Own Factory Bulbs |
| Ballast Included | No |
| High Beam | 9005(NOT Included) |
| Low Beam | H11 (NOT Included)" |
| Modified Item | No |
| Bulb Shape Code | H11 |
| UPC | 988996203677 |
| Certifications | DOT, SAE |
| Other Part Number | GM2502283 GM2503283 GM2502212 GM2503212 Replacement Assembly Pair |
| FItment | 2007-2014 For GMC Sierra |
Torchbeam_lamp

KAC Headlight Assembly For 2007-2014 For GMC Sierra 2000-2006 Yukon 60 DAYS FREE RETURN
Features:
Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit
Fitment:
2007-2014 For GMC Sierra
OE Number:
GM2502283,GM2503283
TIPS:
â‘ .Installation Guide: 1.Undo the screws, clips, or retainer springs that hold the headlight in place. 2.Disconnect the wiring from the assembly. 3.Detach the headlight from the vehicle to replace it with a new one. 4.Fit in the new headlight assembly. 5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed. 6.Reconnect the wiring that was unplugged from the assembly. 7.Put back the grille and other components that you removed. Seal them back into place. 8.Test the new assembly. â‘¡.Adjustment Guide: Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground. 1.Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle. 2.Adjust the headlight individually.Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens. 3.Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall. 4.Test your results.
Adhering to the brand principle ---The high-quality material creates excellent products and the brand slogan---Light Up You More, KAC has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers.
Paired with our innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it.
1) KAC accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover.
2) We will only ship to the confirmed PayPal shipping address given with the payment.
3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.
4) To avoid initiating an unpaid item claim, please pay within 7 days.
1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.
3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order.
1) KAC offers 5 years warranty and a 60 days free return.
2) We offer a free return & money-back guarantee. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)If you have any questions, please contact us via eBay message.
3) Any items damaged because of incorrect installation will not be refunded.
4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed.
Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.
All rights reserved. |
Shop Category Excellent Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
