LCR Meter Handheld Capacitance Meter Inductance Meter With Accuracy 0.20%

Product Features

¤ The highest measuring frequency is 100kHz;
¤ Supporting DC Resistance and Electrolytic Capacitance Measurement;
¤ Automatic Recognition of Component Measurement;
¤ Support screening and deviation measurement;
¤ 2.8-inch TFT display, 4-bit semi-display;
¤ USB communication interface;
¤ Large capacity lithium battery power supply;
¤ Support SCPI protocol;
¤ Provide system settings, can configure language, buzzer, screen brightness and so on according to their own requirements;
¤ The basic measurement accuracy is 0.2%
¤ Adjustable measuring speed, manual and automatic range;
¤ Short circuit correction with open circuit;
¤ Provide multiple test ports.

 

Main technical indicators

Test frequency

100Hz, 120Hz, 1KHz,10KHz, 40KHz, 100KHz

Basic accuracy

0.20%

Display

2.8 inch TFT LCD

Display digit

Main parameters: 5 bits, secondary parameters: 5 bits

Measurement parameters

Main parameters: L/C/R/Z, sub-parameters: X/D/Q/theta/ESR

Electrolytic capacitor mode

√

DCR mode

√

measuring range

L：0.000μH～2000H，C：0.000pF～20.000mF，R：0.0001Ω～200.00MΩ

Measurement display speed

1/s (slow), 2/s (medium), 4/s (fast)

Internal offset

0-500 mV adjustable, 1 mV step.

Test level

0.1Vrms、0.3Vrms、0.6Vrms   1Vrms

Calibration function

Open circuit calibration and short circuit calibration

Screening function

The limit range of screening can be set to 1%-50%, of which the fixed points are 1%, 5%, 10%, 20%.

Deviation measurement

Used to compare the percentage of deviation between the component and the nominal value set and display

Other

Adjust backlight brightness, automatic shutdown time can be set, Chinese and English optional, USB Device communication

 

Standard accessories:

¤ Mini-USB data Wires;

¤ Power adapter;

¤ Short circuit chip;

¤ Red&black rubber plug;

¤ Large capacity lithium battery

¤ Kelvin test clip