Features:

 

Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit
Comes with a Complete Set of Headlights (Driver and Passenger Side)
Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights
Requires no Modification or Drilling

 

• Highly Guarantee - The Headlight meets to OE standards for quality; It contains one pair of left (driver side) & right (passenger side) headlight; Easy installation would be save more time.

 

• Professional Design- Our headlights are waterproof due to the fully-sealed structure & one-way vents, which prevent moisture and work well in any severe weather, No misting worries!

 

• BRIGHTER & SAFER - Clear lens and design make lighting brighter and wider because of the good transparency and light reflectivity of the headlights; Which can make your driving safe

 

• RELIABILITY & DURABILITY - All  Our headlights are tested strictly and checked to ensure their superior performance during driving; and the shockproof housing is tougher than others, great for any rough roads.

 

Fitment:

 

2007-2013 Sierra 1500 4.3/4.8/5.3/6.0/6.2L 

2007-2014 Sierra 2500 HD; Sierra 3500 HD 

2007 Sierra 2500 HD Classic 6.0/6.6L; Sierra 3500 Classic 6.0/6.6L

 

OE Number:

 

GM2502283,GM2503283

Note:

1.High quality lights.Safety and Durable.
2.DOT/SAT approved for street legal. Safety & Fashion.
3.High grade ABS plastic. For toughness, impact resistance, and heat resistance.
4.Condition: 100% Brand New and High Quality
5.Material: ABS Plastic Housing / Polycarbonate Lens
6.Color: Chrome Housing +  Clear Lens
7.100% Brand New!
8.Professional Installation is Highly Recommended.
9.Installation Instruction is NOT Included.
10.Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall.

 

TIPS:  

 

①.Installation Guide:  

1.Undo the screws, clips, or retainer springs that hold the headlight in place.  

2.Disconnect the wiring from the assembly.  

3.Detach the headlight from the vehicle to replace it with a new one.  

4.Fit in the new headlight assembly.  

5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.  

6.Reconnect the wiring that was unplugged from the assembly.  

7.Put back the grille and other components that you removed. Seal them back into place.  

8.Test the new assembly.  

②.Adjustment Guide:  

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.  

1.Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.  

2.Adjust the headlight individually.Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

 3.Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.  

4.Test your results.