Bluetooth Digital Clamp Meter AC/DC Current Voltage Tester Clamp Multimeter NCV Detectortemperature probe【Bluetooth APP Clamp Ammeter】It can be connected with mobile phone by Bluetooth, Auto pair with Android / IOS phone via bluetooth nearby, It's easy to install, just scan the QR code or search “AiLink” in Google play or APP Store, so you can measure data and analyze it by mobile phone APP. NOTE: The mobile phone APP can be installed in iphone 4S iOS 7.0 or android 4.30 system and up
[Safe NCV Detector] 45mm large jaw design can easily clamp on thick wires and take amperage measurement without breaking into circuit. Non-contact voltage detection checks volts status in simper and safer ways with visual and audible alarm. The amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. Overload protection is up to standard of CATⅡ1000V or CATⅢ600V in all range.Non-contact voltage(NCV) function can detect voltage without touching any wires and avoid electric shock .
【Accurate Current Meter】0.1 A Precise Resolution for 0.1-400 A AC DC Current, 1 A for 400 A.1000 A, which means it can accurately test the amperage for both high and low AC DC Current. Ideal pliers meter for solving electromechanical problems in car diagnostics, boats, cables and household appliances, etc
| DC Voltage: | 600mV,6V,60V,600V(Accuracy: +/- 0.5% + 2 digits); 1000V(Accuracy: +/- 0.8% + 2 digits) |
| AC Voltage: | 6V,60V,600V(Accuracy: +/- 1.0% + 3 digits); 750V(Accuracy: +/- 1.5% + 3 digits) |
| DC Current: | 600A(Accuracy: +/- 2.5% + 10 digits); 1000A (Accuracy: +/- 3.0% + 10 digits) |
| AC Current: | 600A(Accuracy: +/- 2.5% + 10 digits); 1000A(Accuracy: +/- 3.0% + 10 digits) |
| Resistance: | 600Ω(Accuracy: +/- 1% + 3 digits),6000Ω,60KΩ,600KΩ,6MΩ(Accuracy: +/- 1% + 2 digits) 60MΩ(Accuracy: +/- 1.5% + 3 digits) |
| Capcitance: | 6nF(Accuracy: +/- 5% + 3 digits), 60nF,600uF,6uF(Accuracy: +/- 3.0% + 5 digits); 60uF(Accuracy: +/- 5% + 10 digits);600uF,6mF,60mF(Accuracy: +/- 5% + 10 digits) |
| Frequency: | 9.999Hz, 99.99Hz,999.9Hz,9.999kHz,99.99kHz,999.9mHz,9.999MHz (Accuracy: +/- 0.1% + 5 digits) |
| Duty cycle: | 0.1%~99.9% |
| Temperature: | -20℃~-1000℃(-20~ 150℃ Accuracy: +/- 3℃ + 1 digits ; 150~1000℃ Accuracy: +/- 3%+ 2 digits;);-4℉~-1832℉(-4~ 320℉ Accuracy: +/- 5℉ + 2 digits ; 302~1832℃ Accuracy: +/- 3%+ 3 digits;) |
| Range selection | Auto Ranging |
| Maximum display | 6000 counts |
| JAW Max Opneing Size | 45mm |
| Function | √ Data Hold Y/Diode Test/Auto power off/ Backlight Display/ NCV Testing/True RMS/ Overload Protection/temperature: Celsius, Fahrenheit Unit/Phone APP |
High precision DMM
Comes with pointy sharp test leads and 6000 counts digit design,
highly accurate meterk current pliers for troubleshooting household and commercial, automotive, home and industrial electrical issue.
MAX/MIN and Data Hold
Press the "MAX/MIN" button to lock & freeze MAX or MIN value. Press the "DH" button to freeze any measurement data, convenient for record and analyze.
"REL" button is for entering into relative measuring mode, there you could check the different between present measurement data and relative value clearly.
Safety AC Current Measurement
Just clamp on to measure AC current amp easily without peeling off wires. Safety to avoid some unnecessary electric shocks.
Note: Please clamp only one conductor. Offset or multi-clamp conductors will result in a misreading of zeros.
45 mm open jaw multimeter
45mm open jaw design, convenient to clamp thick measuring wires. Portable size, easy to pull the trigger and clamp with one hand.
Backlight LCD display, clear reading in dark and gloomy areas.
1 * Test Lead
1 * English Manual
1 * Storage Bag
HP-570S-APP connection instructions:
1. scan the QR code or search "AiLink" on Google Play/APP Store to download
2. turn on Bluetooth on your cell phone → open the APP → register the app
3. on the "Devices" page → press "+" in the top right-hand corner → select "Nearby devices" → "Clamp Meter 27:A5"
4. press "Start" → Enjoy your measurement.
Tips:
a) To ensure continuous data recording, the clamp multimeter will not turn off automatically unless the battery is dead
b) You can set the sampling rate from 1 time/minute to 120 times/minute.
c) Make sure that you press "STOP" in the APP after the measurement, otherwise the data will not be saved.
