logo
Product Information
  • Wing Hand Tighten Machine Screws can be used to fasten components together by means of through holes and securing with a nut at the other end or they are screwed into a tapped hole with the matching thread
  • Also known as: Metal Thread, Stove Bolt, Wing Screw, Wing Bolt
  • Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Most products can be identified by the following markings: A2, A2-70, 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
  • Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
  • Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
  • Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions IMPORTANT: Our stock is made to standards DIN 966 and JIS B 1111: 1996, the difference between the 2 standards is the head diameter measurement. If head diameter is critical please check the technical specifications table or contact us prior to placing your order and we can check the stock
  • Photos: Are of the product but may not be the actual diameter, head size or length you require, always refer to the size in the description and additional specifications data provided prior to ordering
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and The Fastener Warehouse is not responsible for any loss, claim or damages arising therefrom. In developing this information, The Fastener Warehouse has made a determined effort to present it accurately
  • Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
  • Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Technical Specification
Machine Screw
Type
Wing Head
Head Style
M8 (8mm)
Thread Size
M8 x 1.25p Coarse
Size x Pitch
1.25mm
Thread Pitch
Metric - Coarse
Thread Type
Right Hand
Thread Direction
Metric
System of Measurement
25mm
Item Length
From Under Head
Length Meausured
Full Thread
Thread Length (Approx)
7.78 - 8.00mm
Product Diameter D
5/16"
Closest Size in Imperial
30.80mm
Head Diameter A
15.50mm
Wing Height H
4.13mm
Wing Thickness W
Hand Tighten
Drive Style
Stainless Steel
Material
A2-70 G304
Grade
Excellent
Corrosion Protection Level
DIN 316
Standard
Bolt and Nut Australia
Brand
MS04PWM080025, S4WSP825
MPN
9350629121954, 9337175039230
UPC
Free Standard Shipping
Delivery
Select From The Dropdown Above
Number in Pack
ebay listing template design by dZine-hub