Dental Lab Micro Motor & Burs & Handpiece Micromotor Polisher 35k/45k Optional
 
 
①10 Dental Burs

Dental Lab Steel Carbide Burs for Polishing Teeth Drill Handpiece 2.35mm

Description:
Shank Diameter:2.35mm/
Fit for Dental Handpiece with 3/32 inch collect
The main features of carbide rotary burs :
It can be used in processing all kinds of metals(it involved all kinds of Hardened Steel)and nonmetal(such as marble , Jade , bone ),
The hardness of the workpiece is up to <HRC70;
The small, short-handled grinding wheel can be replaced by it in most part of work without dust pollution;
It has high processing quality ，high polishing, and can processing various shapes moulds with high precision .
It has long service life, 10 times longer than the high speed steel cutter, 200 times longer than the durability of the small grinding wheel;
It is not only easy to master,use, but also safe and reliable. labor intensity can be reduced ,and better the working environment.
High economic efficiency,and comprehensive processing cost Can be reduced 10 times around .
Carbide rotary burrs are usually driven by hand-held electric, or wind-energy tools (also available on machine tools).
The speed of an electric or wind-energy tool is usually 6000-50000 revolutions per minute.
The tool must be clamped rightly when using. It is better to choose reverse milling as cutting type to avoid reciprocating cutting. The work should be to avoid the chip flying,
Please wear the protective glasses to avoid scraps flying-out when you are working.
 
Note：Burs only for Straight handpiece not Contra Angle handpiece
 
 
 
Package:
Set of 10 pcs in one plastic box
 
 
②35K Handpiece A204 
 
Introduction:
Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force
from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various
burs according to the material and working way are available. The products are mainly used for dental laboratory
and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics,
Industry market, beauty wood carving,egg carving etc.
Feature:
1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil)
2.35,000 RPM's provides higher speeds, greater torque
3. Newly designed front nose with 2 heavy duty front bearings
4.Newly designed dust seal protection
5.Newly designed spindle balancing,
6.Newly designed cooling fan and air flow,
7. Newly designed plastic grip
Technical Parameter:
Speed range: 0-35,000 R.P.M
 
③35K Handpiece H73L1 
Compatible with 2.35mm burs
Speed range 0 - 35,000 R.P.M
110V/60Hz±10%
 
 
④Micromotor N8(no handpiece) 
 

Description:

Micro motor machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 50000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving, egg carving etc.

Feature： 

1.Compact sized control box
2.Very High-powered and quality 0-50,000rpm.
3.Tips size: 2.35mm.
4.Tool exchange method using cam .(twists the handle counter-clock wise to change
the bur and can be easily restored back to the original position)
5.Non stage speed system.
(it's well designed to output from zero to 50,000rpm by using non stage speed system)
6.Right & Left turning ability.
7.Foot ON/OFF switch system .(Variable Control system using foot )
8.Installed special ball bearings for super high speed.(less heat and noise)
9.Dust seal protection for excellent durability.

Technical:

Speed range.........................0 - 50,000 R.P.M

Collet size.............................3/32''

Bur size.................................2.35mm

Voltage ................................(a)220V/50Hz±10%
(b)110V/60Hz±10%

Weight.................................. 3.45KG

Packing list：

Power Control unit. (AC110V orAC220V) 1 PC

Foot Control system 1 PC

HandpieceSupport 1 PC

Note:Not include handpiece

 
⑤Micromotor N8 45K 
 
Micromotor machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 45000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving, egg carving etc.
 
Micromotor handpiece is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 45000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving, egg carving etc.
 
Important reminder:
To avoid the problem of speed loose control and maintain long lifespan of this machine,please do turn the speed to "min" with the speed controller before start the following operation : push "on"or"off" button,Switching bur running between clockwise and reversed or Switching control between manual and foot pedal.
 
 
Feature：
 
 
 
Compact sized control box with precise small & strong micro motor handpiece
 
Very High-powered and quality 0-45,000rpm
 
Tips size: 2.35mm
 
Tool exchange method using cam (twists the handle counter-clock wise to change the bur and can be easily restored back to the original position)
 
Non stage speed system (it's well designed to output from zero to 50,000rpm by using non stage speed system)
 
Right & Left turning ability
 
Foot ON/OFF switch system (Variable Control system using foot )
 
Installed special ball bearings for super high speed(less heat and noise)
 
Dust seal protection for excellent durability
 
 
 
(b)50K R.P.M Micromotor handpiece
 
* Newly designed for superior performance And very easy to use
* 45,000 rpm's provides higher speed, greater torque
* Newly designed front nose with 2 heavy duty front bearings
* Newly designed dust seal protection
* Newly designed spindle balancing
* Newly designed cooling fan and air flow
* Twist type chuck release
* Newly designed plastic grip
 
* Easy to change chucks
 
* Includes 3/32" chuck
 
 
Technical:
 
 
 
Speed range 0­ - 45,000 R.P.M
 
Collet size: 3/32''
 
Bur size：2.35mm
 
Voltage 110V/60Hz±10%
 
Weight: 3.00KG
 
(b)45K R.P.M Micromotor handpiece
 
Speed range 0­ - 45,000 R.P.M
 
Collet size: 3/32''
 
Bur size：2.35mm
 
Voltage: DC30V
 
Weight:500g
 
 
 
Packing list：
 
1 Control box
 
1 On/Off Switch Foot Pedal
 
1 Handpiece base
 
1 45000rpm Handpiece
 
1 Chuck wrench
 
⑥45K Handpiece 
 Voltage：DC 30V

CE certification

Portable Design (Connectors to your Power Control unit for Dental Lab Polishing)

Installed special ball bearings for super high speed (Do not need add oil)

0-45000 rpm
 
 
⑦Micromotor N3+35K Handpiece 

Important reminder:
To avoid the problem of speed loose control and maintain long lifespan of this machine,please do turn the speed to "min" with the speed controller before start the following operation : push "on"or"off" button,Switching bur running between clockwise and reversed or Switching control between manual and foot pedal.
Features:
Compact sized control box with precise small and strong micromotor handpiece
Very High-powered and quality 0-35,000rpm Made in Korea.
One year warranty
Our product has a virtue is tool exchange method which using CAM(twist the handle counter-clock wise to change the bur and can be easily restored back to the original position)
Another virture is non stage speed system(it's well designed to output from 0--- 35,000rpm by using non stage speed system)
Right & Left turning ability
Foot ON/OFF switch system
Specification:
Weight:2.0KG
Burs size :2.35 mm
 
⑧Micromotor N10
Important reminder:
To avoid the problem of speed loose control and maintain long lifespan of this machine,please do turn the speed to "min" with the speed controller before start the following operation : push "on"or"off" button,Switching bur running between clockwise and reversed or Switching control between manual and foot pedal.
 
Feature:
 
Attention: please remember to make the speed controller zero when switch on or off the machine and when you do Reversible Switching.
Compact sized control box
Very High-powered and quality 0-35,000rpm
Our product has a virtue is tool exchange method which using CAM
(twist the handle counter-clock wise to change the bur and can be easily restored back to the original position)
Another virture is non stage speed system(it's well designed to output from 0--- 35,000rpm by using non stage speed system)
Right & Left turning ability
Foot ON/OFF switch system
 
 
Technical:
 
Voltage:110V
 
Packing List:
 
Main Unit*1
 
Foot Control*1
 
Electric motor*1
 
contra angle handpiece*1
 
straight cone handpiece *1
 
Speed: 0-35000rpm
Torque: 280gf.cm
Power: 65W 
Forward/reverse can be switched arbitrarily
Low noise, low vibration
Manual stepless speed regulation
Attention: The bur for Contra-Angle Handpiece must have a card slot (the diameter of the bur handle: 2.35mm)
 
⑨metal Micromotor N3 
Feature:
Compact sized control box 
Non stage speed system(it is well designed to output from zero to 35,000rpm by using non stage speed system)
Right & Left turning ability
Foot ON/OFF switch system (the pedal only a switch, not can be control the speed)
New speed control system
Made of iron, more durable. 
Specification:
Compatible with 2.35mm burs
Speed range 0 - 35,000 R.P.M 
Voltage 110V
The handle can rotate 90 degrees to change the bur
Weight: 2 KG
Packing list:
1*Power Control Box
1*On/Off Switch Foot Pedal
1*Handpiece Base
1*35K RPM Handpiece
1*Chuck Wrench
 
 
 
 
Statement (FDA, ARTG)
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies. If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item
 
 
Note:The package can't be shippeed to Alaska/Hawaii,APO/FPO,US Protectorates,Africa,Asia,Central America and Caribbean,Europe,Middle East,North America,Oceania,Southeast Asia,South America,PO Box ,Puerto Rico,Hawaii
 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction

DataCaciques