Product highlights

for TVs with screen sizes from 42"-85" 

supports up to 135 lbs. 

holds TV approximately 1/2" from wall when retracted, or up to 28" when fully extended 

fits VESA mounting hole patterns from 100 x 100mm to 600 x 400mm 

swivel range: 67° left or right 

tilt range: 4° up to 10° down 

stud mounting required 

cable management clips for arms 

post-install leveling adjustments 

includes all necessary hardware 

integrated in-wall box allows a nearly flush installation 

fits between two 16" on-center studs 

openings for cables and junction box (not included) 

small components can be secured to back with included straps 

box dimensions: 14"W x 19-5/16"Hx 3-15/16"D 

mount dimensions: 24-15/16"W x 20-13/16"H x 1/2"D outside of wall (28"D when extended) 

warranty: 10 years 

What's in the box

• In-wall box 
• Arm assembly 
• 2 TV horizontal brackets 
• TV vertical bracket 
• Four 1/4-20 x 3/8" install screws 
• 10-32 x 3/8" Locking-screw 
• Four M5x11mm interface screw 
• Four M6x12mm screws 
• Four M6x25mm screws 
• Four M8x16mm screws 
• Four M8x30mm screws 
• Four M8x20mm screws 
• Four M8x40mm screws 
• Four M8x50mm screws 
• Four M6/M8 washers 
• Four 2.5mm spacers 
• Four 5mm spacers 
• Seven #10-8 x 2.5" lag-screws 
• Four Cable-clips 
• 2 Component straps 
• 2 Rubber grommets 
• 2 Hex-keys 
• Driver-bit 
• Instruction Manual 
• Cutout template 

About this item

Written by Crutchfield's Ralph Graves

Ideal for large TVs

This full-motion Sanus Premium in-wall mount is ideal for large TVs. Its sturdy articulated arm folds back into the included in-wall box, holding your TV just 1/2" out from the wall. When extended, it holds your TV 28" into the room. The mount can support a TV with a 42"-85" screen (measured diagonally) and weighing up to 135 lbs. You can swivel your TV from side to side and pivot it up or down to get the best viewing angle.

Clean, uncluttered appearance

The in-wall box fits between two 16" on-center studs. It has openings in the bottom for cables and for an outlet box (not included). Two included hook-and-loop straps let you fasten small components to the back of the box. Use them to secure your streaming device, electronic switches, or other small components.

Provided clips secure your TV's cables to the arm. This ensures a clean, uncluttered appearance for your mounted TV.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?

Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.