Launch CRP129 OBD2 Scanner Scan Tool ENG/AT/ABS/SRS EPB SAS OIL Service Light Resets Code Reader for Mechanic and Experienced Enthusiast,Red/Black
- 👍【COMPREHENSIVE SCAN TOOL】Featuring reading/clearing codes and viewing live data for four important systems (engine/transmission/ABS/SRS) and special reset functions (Oil Reset, EPB/SAS Reset), this scan tool is a great choice for mechanics to facilitate their diagnostic analysis
- 👍【WIDE VEHICLE COVERAGE】LAUNCH CRP129 code reader works on over 40 OBD2 complaint vehicles after 2006, and the diesel models of 12 Voltage. You may consult us about the coverage via Q&A/Email before purchase, leaving out unnecessary time and troubles
- 👍【FULL OBD2 FUNCTIONS】To most car owners, an obd2 scanner’s ability to read codes and do smog tests is what matters. This launch OBD2 scanner supports full OBD2 tests including I/M readiness and O2 sensor tests etc., that will keep your mind from worrying about emission checks
- 👍【USER-FRIENDLY DESIGNS】LAUNCH CReader CRP129 is 7.4 inches long and 4.4 inches high, enabling it to be easily operated and stored. It displays data clearly with TFT LCD screen and responses within seconds, making diagnostic work smooth, simple and fast
- 👍【WARRANTY & UPGRADE】The diagnostic tool provides 12-month warranty from the date of purchase and lifetime free online upgrade. Notice: The upgrade can be finished with Window-based computer ONLY. The “Password”, i.e. register code, can be found in “help” application
LAUNCH CRP129 is a highly cost-efficient small diagnostic tool developed especially for car DIYers, small repair shops and people who want to be more efficient when doing car repairs. It is a product integrated with OBDII, ENG/AT/ABS/SRS systems diagnoses and EPB SAS OIL service light resets functions. It makes maintenance and service be easily fixed with single hand.
LAUNCH CRP129 code reader supports 43 brands of Asian, US and European vehicles, including SUZUKI, INFINITI, GM, USAFORD, MAZDA, EUROFORD, CHRYSLER, JAGUAR, VOLVO, RENAULT, TOYOTA, DAEWOO, JPISUZU, ACURA, OPEL, LANDROVER, SAAB, DACIA, BENZ, LEXUS, ROMEO, FIAT, VAUXHALL, LANCIA, SEAT, VW, PEUGEOT, CITROEN, SKODA, HYUNDAI, MITSUBISHI, PORSCHE, SUBARU, SPRINTER, AUDI, HONDA, BMW, KIA, MINI, NISSAN, SMART, AUSTFORD, HOLDEN.
Please Note:
- Works on 12V vehicle battery ONLY;
- Must be 16 PIN OBD II protocol.
- For transmission, ABS, and SRS (airbag) diagnostic, it only works with 2006 and newer OBD2 protocol vehicles.
Reasons to choose scan tool LAUNCH CRP129
- Diagnoses 4 systems - Engine, Transmission, ABS, Airbag (SRS).
- Resets 3 components - Oil, EPB and SAS lights.
- Covers 40+ models - from American cars to European vehicles, even Asian!
- Supports 10 OBDII modes - suitable for almost cars.
- Read and Clear car trouble codes.
- Tests Oxygen sensor and carbon canister.
- Displays dynamic data stream in one graphic.
- Updates every year and no extra fee.
- Reports diagnostic data - easy to analyze and share.
- With 8 languages - English, French, German, Spanish, Portuguese, Russian, Japanese and Italian.
|
|
|
|
|
|---|---|---|---|
Airbag Reset Scan ToolThe LAUNCH CRP129 supports checking airbag system to see if all the sensors and circuits of the airbag are functioning. After running the diagnostics and repairs, you can read live data to check the passenger airbag status and erase codes to reset the airbag light. The built-in DTC library (for codes definitions) will save you time searching online. |
ABS Diagnostic Code ReaderWith this LAUNCH OBDII scanner, you can access the ABS to read and erase DTCs and view real-time data flow within the system for detailed running conditions analyzing. It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light. |
A/T System Code ScannerThe automatic transmission warning light means there's an issue with the transmission, possibly the fluid temperature, fluid level, or pressure. The LAUNCH CRP129, an upgraded version of Creader vii+ scanner, can access and communicate with the transmission to tell you the running status of the sensors, to ensure a fast and accurate diagnostics of the existing or potential issues. |
Engine Fault OBDII ScannerThe CRP129 scanner supports 10 OBDII test modes, including: Read/Erase Codes, Turn off MIL, I/M Readiness, Data Stream, Freeze Frame, O2 Sensor Test, On-board Monitor Test, EVAP System Test, and Read Vehicle Info. |
|
|
|
|
|---|---|---|
Real-time DataStream AnalysisThe LAUNCH CRP129 scanner can read data streaming for OBDII/ ENG / AT / ABS /SRS (Airbag), which shows the specific four systems live data readiness and allows you to analyze the real-time data stream via a waveform display, for quickly and accurately diagnostics. |
Lifetime Free Online UpdateNot just featuring riches of easy-to-use diagnostic functions, the CRP129 scanner also gets access to free software updates via the internet-connected PC with multilingual support. You’re able to update the diagnostic software on your Windows 7/8/10/XP with a TF card. |
DTC Lookup and Recording Data FunctionDTC Lookup: Built-in DTC lookup library, Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) code, show definitions Recording Data Function: Review or delete the recorded DTC, data streams, and freeze frame. You can check it on device diagnosis menu the “Review” part to check. |
How to Update This Tool?
There are two methods to update this tool. We would recommend method 2 (Via TF card) which is more accessible than method 1(Via USB cable).
Step 1: Go to LAUNCH official website(refer to the manual) and click Updating Tool Download icon.
Step 2: Download and install the CRP129 update tool and launch the program when installed.
Step 3: You will be prompted to type in the serial # (located on the back of the tool)
Step 4: Hit [Device Upgrade] to enter the register page, type your email info (check the "Register Code" on the device menu "Help--Tool Information" ).
Note: the “User password” is equal to the “Register Code.”
Step 5: Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU.
Step 6: Reopen the CRP update Suite and select the updates you would like to preform or click select all and click Download.
Step 7: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.
