For BMW F650 Twins ALL
For BMW C evolution ALL
For BMW C400 X ALL
For BMW C650GT ALL
For BMW C650 Sport ALL
For BMW F650 Singles ALL
For BMW F700GS 2006-2017
For BMW F800GS 2006-2017
For BMW F800GT ALL
For BMW F800R ALL
For BMW F800ST ALL
For BMW F900R ALL
For BMW F900XR ALL
For BMW Funduro 650 ALL
For BMW G310 GS ALL
For BMW G310 R with factory heated grips ALL
For BMW G650GS ALL
For BMW HP4 ALL
For BMW K1200GT ALL
For BMW K1200S ALL
For BMW K1300S ALL
For BMW R nineT 5 ALL
For BMW R nineT Pure ALL
For BMW R nineT Racer ALL
For BMW R1100 GS ALL
For BMW R1100 R ALL
For BMW R1100 RS ALL
For BMW R1100 RT ALL
For BMW R1100 S ALL
For BMW R1150 GS ALL
For BMW R1150 R ALL
For BMW R1150 RS ALL
For BMW R1150 RT ALL
For BMW R1200GS 2004-2013
For BMW R1200R 2006-2018
For BMW R1200RT 2005-2019
For BMW R1200 S ALL
For BMW R1200GS LC 2014-2018
For BMW R1200RS 2015-2018
For BMW R1250 GS 2019-2021
For BMW R1250 R 2018-2019
For BMW R1250 RS 2018-2019
For BMW R1250 RT 2019-2022
For BMW R18 2020-2021
For BMW S1000R ALL
For BMW S1000RR ALL
For BMW S1000XR ALL
Top Kit:
You'll want a Top Kit if:
There is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn.
There's a heated grip wire that comes out the bottom half of your rubber grip flange.
Note:
If you don't know which type of product your motorcycle is suitable for, please contact our online customer service before submitting an order.
The chrome grip flange must be removed before mounting the Throttle Lock. Top Kit can be used after chrome grip flange is removed. Bottom Kit may interfere with use of indicator button on housing.
Friction Pads are required.
The GFYSHIP Throttle Lock was designed to be used with friction pads. Friction pads can last anywhere from 3,000 miles to 40,000+ miles. The wear depends on how often you rotate the throttle while it is engaged and if your throttle housings has sharp edges that rub on the friction pad.
Which friction pad should you use?
The friction pads come in 3 different thicknesses. Your kit comes with ONE of each size but you will only need to apply one pad to your Throttle Lock. You will want to start with the thickest friction pad and see if it fits between the throttle housing and the Throttle Lock Stopper Arm. If it doesn't fit, try the next size down until you find the right size that does not make contact with the throttle housing when disengaged.
Where should I place my friction pad?
We recommend adhering the friction pad along the top edge of the Stopper Arm, but, for some motorcycles, this isn't the best solution. If your throttle housing has any bevels on it which will interfere with the friction pad during any part of the rotation, then you will want to adjust the placement of the friction pad to avoid those bevels. Sometimes this means placing the friction pad a few millimeters away from the top edge of the stopper arm, or maybe placing it to the far right or left on the stopper arm.
