Sturdier and much easier-to-use than Ultimate Nipper! For beginners of single-blade nipper! Blade One Nipper is an entry-level single-blade nipper. Blade One nipper has a thicker blade than Ultimate Nipper, resulting in a slightly pressed cutting surface on the cutting board side, but it is sturdier due to the thickness of the blade. Single-edged blade structure enables the same usage as Ultimate Nipper. The blade angle is adjusted to make the blade more durable than that of the Ultimate Nipper. While Ultimate Nipper can cut transparent plastic up to 1 mm dia., Blade One Nipper can cut transparent plastic up to 2 mm dia. The cut comfort is slightly heavier than Ultimate Nipper, but there is almost no difference in the cut surface in slice-cutting. Blade One Nipper Product Code：GH-PN-120 Quality Indication ・Material: Special tool steel (made by Kobe Steel, Ltd.) ・Total length: approx. 120 mm ・Weight: approx. 60 g ・Blade hardness: ≧ HRC58 ・Single-edge specification ・Blade breakage prevention stopper ・Over-opening prevention pin ・Spring loaded ・Soft grip ・With original nipper cap Cutting capacity ・Target materials: Plastic (PS resin, PP resin, ABS resin, PE resin) only ・Cutting capacity: Materials of ⚠NOTE ・The nippers are delicate and sharp. If misused, the blades may chip or break. ・The blade can cut plastics with ease and precision. Please do not grip the nippers with excessive force. ・The blade is thinner toward the tip and is more likely to break. Please cut as close to the center of the blade as possible. ・Please do not twist the blade during cutting or releasing from the runner. Twisting may cause it to break under load. ・Please do not cut plastics that are too long for the blade. The load will be applied to one point, causing it to break or bend. ・Please do not use for cutting plastics that exceed the cutting capacity or materials that are not compatible (metal, resin, paper, and other materials besides plastic). ・Please do not use cutting materials such as plastic plates, tags, parts, or dowels. ・Please remove chips from the blade with a toothbrush (a blade brush) during and after use. Cutting with chips remaining on the blade may cause excessive load and damage. In particular, cutting with chips stuck in the base of the blade can easily cause misaligned. ・Please do not touch the cutting edge directly. The cutting edge is sharp and may get injured. ・Sebum may cause rust. If you touch the metal parts directly, wipe off any fingerprints and dirt, and apply rust-preventive oil. ・Humidity may cause rust. Please oil more often, even during the rainy season. ・Poor lubrication of moving parts causes wears on the shaft and rattling, leading to reduced sharpness. Please lubricate the moving parts regularly. ・Please wear protective glasses for safety. ・Cutting materials may fly away. Please be sure no one or fragile objects are around before use. ・Please keep out of reach of children. ・Please put on the attached nipper cap for safekeeping.

Full Specifications

TOOLS

PLIERS/CUTTERS

On-line orders are important to us and in-stock products should be shipped within two business days of receiving the order. If there is reason we cannot ship in this time we will contact you for any change in instruction.

Orders are shipped by either Australia Post, TNT, Toll or Fastway Couriers, please understand these services operate Monday to Friday as a general rule. We have electronic tracking via the carriers but cannot divert goods from the original address given.

Dangerous Goods

Some items such as rocket engines and RC fuel require additional charges due to “Dangerous Goods” category. Due to these items being sent by a courier, someone must be home to receive the item, or a slip may be left instead. These items cannot be shipped to PO boxes. Please note, rocket engines of size 'E' or higher cannot be shipped. They can only be picked up in store.

Oversize Items

Any items that are larger than 1 metre in any dimension are considered an oversize item and are not accepted by Australia post and as such, require additional charges to be sent by courier. Due to these items being sent by a courier, someone must be home to receive the item or a slip may be left instead. These items cannot be shipped to PO boxes.

Frontline Hobbies is committed to providing customers with the best products and service. We are aware that sometimes returns are required and have detailed in this policy how to return a product to Frontline Hobbies.

Please note that all products are sold with manufacturer’s warranty unless otherwise noted.

30 Day Return Guarantee

Not what you expected? Changed your mind?

We offer a 30-day return policy for any unopened, undamaged product in original condition.

Contact us within 30 days of delivery and we will gladly accept your return. Then package and ship it back to us. Once received, we will arrange a credit or refund.

You must make sure that the returned product is suitably packaged to prevent damage during return shipping. We will not accept responsibility for goods, which are damaged whilst in transit back to us.

A copy of the original invoice or reference number must be included with the returned product. If proof of purchase is not provided, we may not be able to offer a replacement product, credit, or refund.

Please note, for change of mind returns, it is the customers responsibility to pay for return postage.

Frontline Hobbies was established in 1978 and has grown over the years to be the largest Australian hobby store.

The original store sold only model soldiers trading from approximately 10sm but soon expanded to include model kits and model rail.

The early trading name of the store was Mainly Military, reflecting the model soldier bias, but changed in the late eighties to trade as Frontline Hobbies.

Later, radio control was added to the range, then Die-Cast collectables, games, puzzles and finally under twelves educational toys.

Located at 5 Lang Road, Broadmeadow, NSW, 2292, Australia. If you are planning a visit, please allow several hours to take it all in. If you cannot physically visit, please take a virtual tour.

Frontline Hobbies is Australian owned and operated by the Scott family since inception. We have decades of experience and knowledge on all thing’s hobby.