Ultimarc J-PAC PC to JAMMA Board (Control Only Version)
The J-PAC is a board which allows plug-in connection of a JAMMA arcade cabinet to a USB port on a PC. It incorporates all the advanced features of the I-PAC with an on-board JAMMA connector. Includes USB cable. This Control-Only version removes the VGA connector (no video support on this one) but includes buttons 5&6 in the JAMMA connector.
Features:
- Has inputs fully protected against static discharge and reverse connection, now supports 3 extra JAMMA connections (Tilt, Service SW and Test)
- Fully programmable key code set. Stored even after power off.
- Self-Test LED gives an instant check of all your wiring. Can indicate which, if any, input has a problem.
- No separate power needed.
- Does not use a matrix - no ghost keys. All inputs are completely separate and generate their own interrupt - this is the fastest possible method.
- Does not use a scanning method which causes a variable delay.
- Either use standard MAME keys or you can program your own character set.
- Shift functions: Holding "Start1" and pressing other buttons sends a range of codes for MAME functions such as "escape", "Coin 1", "tab", "enter". This means no extra buttons are needed on the cabinet. In programmable mode any input can be the shift key and all keys can be programmed with a shifted code.
- No special drivers needed. USB drivers are generic Windows.
- All control inputs which are part of a normal JAMMA standard are routed to an on-board JAMMA edge connector.
Contains:
- J-PAC Board (Control Only Version)
- USB Cable
Comparison of J-PAC Control-Only to J-PAC Standard:
|
J-PAC Standard |
J-PAC Control-Only |
| Video Passthrough |
YES |
NO |
| VGA Cable Supplied |
YES |
NO |
| Buttons Per Player |
8 |
6 |
| Buttons 5 and 6 Support |
Screw Terminals |
JAMMA Connector (newer cabinets usually are wired this way) |
| Speaker Support |
Screw Terminals |
To empty header location on board, optional usage. |
| Product Link |
JPAC Standard |
JPAC Control-Only |
Support Info - See our site for the following:
- J-PAC support & install PDF
- J-PAC FAQ. PDF
- Link to download the WinIPAC config software
* We ship every Mon-Fri, order by 12pm Eastern and your order ships that day! *
About Us: Specializing in arcade games and other entertainment industry items, including poker tables and slot machines, T-Molding.com has been providing tee molding to the gaming industry since 2000 and arcade game parts since 2016 on ArcadeRenovations.com We have over 150 different t-moldings and 500+ arcade parts, all stocked and shipped from our warehouse in Lebanon, CT.