Cylinder Head - Performer RPM - Assembled - 2.090 / 1.660 in Valve - 170 cc Intake - 72 cc Chamber - 1.550 in Springs - Aluminum - Ford FE-Series - Each
The Edelbrock #60065 Performer RPM Cylinder Heads are designed for use
with 1961-76 390-427-428 Ford applications. Performer RPM heads are
perfect for street performance, daily drivers, and muscle cars where
more performance is needed
| Series | Performer RPM |
|---|
| Material | Aluminum |
|---|
| Grade Type | Performance |
|---|
| Quantity | Sold Individually |
|---|
| Horsepower | 400-550 HP |
|---|
| Availability Note | Available to Order |
|---|
| Warranty | 12 Months |
|---|
| Seat Angle | Exhaust 45 deg/Intake 60 deg |
|---|
| Emissions Code |
|
|---|
| Hazardous Materials Warning |  WARNING:
This product can expose you to Lead, which is known to the State of
California to cause cancer or birth defects or other reproductive harm.
For more information, visit www.P65warnings.ca.gov. |
|---|
| Installation Notes | - 428
Cobra Jet-sized valves promote excellent flow for streetable power;
Rocker shaft stud kit #6009 provides better rocker shaft retention and
is highly recommended for use with Edelbrock FE heads. It eliminates
wearing of the threads and the possibility of bottoming the rocker shaft
bolts in the head; Match with Edelbrock head gasket sets; 390 GT
exhaust will not fit; Bare heads will have valve guides and seats
installed, but will require final sizing and a valve job to match the
valves you will be using; Recommended spark plugs are Champion RC12YC or
equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness:
5/8"
|
|---|
| Intake Valve Diameter | 2.09 in |
|---|
| Intake Runner Volume | 170 cc |
|---|
| Push Rod Diameter | 0.375 in |
|---|
| Valve Angle | 13 Degree |
|---|
| Valve Spring Diameter | 1.55 in |
|---|
| Valve Spring Maximum Lift | 0.600 in |
|---|
| Valve Stem Diameter | 0.375 in |
|---|
