- 【Main Technical Indicators】Model: LD-4, Maximum Speed: 4000r/Min, Centrifugal Force: 2770 X G, Capacity: 4 Tubes X 100ml, Timing: 0-60min.
- 【Variable Speed Control】Timing Control of Motor Speed, the Clear Control Panel,Timing by Rotation Button, Easy to Operate, Spend less Time.
- 【Safe and Low Noise】Dustproof Cover Can Effectively Prevent the Tubes of Centrifugal Machine from Being Dirty, at the Same Time, It Also Can Decrease Noise Made by High Speed of Rotor.
- 【Features】LD-4 Table Centrifuge Has Beautiful Shape, Large Capacity, Small Volume and Complete Functions. Its Performance Is Stable, Speed Is Adjustable and Can Automatically Adjust the Balance, Low Temperature Rise, High Efficiency and Wide Applicability.
- 【Wide Application】Electric Centrifuge Is a Routine Laboratory Centrifuge. Can Be Used in Various Fields Such As Biology, Chemistry, Food, Education and so on.
Technical Data:
Speed: 4000 R/Min.
Maximum Relative Centrifugal Force: 2770*G
Voltage：110V,60hz
Fixed Time: 0-60min
Capacity: 100 Ml × 4 (Diameter: 36 Mm, Length: 115 Mm)
Packing List:
1 X LD-4 Table Centrifuge
Safety Instructions:
-If the Power Indicator Is Not on When the Machine Is Started, Stop the Machine for Inspection Immediately.
-It Is Forbidden to Operate Without Load Without Turning Head.
-Before Operation, Check the Swivel for Corrosion Damage.
-Do Not Open the Cover of the Centrifuge and Do Not Touch the Rotating Head When the Rotating Head Is Running.
-It Is Forbidden to Turn the Head to Operate Under the Condition of Unbalanced Loading.
Instructions for Use:
(1) the Working Table of the Centrifuge Shall Be Flat and Firm, and the Working Room Shall Be Clean, Dry and Well Ventilated.
(2) Turn on the Power Switch and the Indicator Light Will Be on.
(3) Open the Centrifugal Cover, Wipe the Inner Cavity and the Rotating Head Clean.
(4) Put the Test Tube with the Same Weight.
(5) Set Timing
(6) Turn on the Power Switch
(7) Adjust the Speed Control Knob to the Required Speed.
(8) Before Each Shutdown. the Speed Control Knob Must Be Set to the Minimum Position. Set the Timer to Zero. Turn off the Power Switch Again.
(9) Wipe the Inner Cavity and Rotating Head. Close the Centrifugal Cover.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
