Product Information
- Hex Class 10 standard full nuts are the most common nuts available and are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has external screw threads. Hex is short for hexagon, which means they have six sides
- Also known as: Hexagonal Full Nuts, Standard Hex Nuts, Finished Hex Nuts
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements we have a range of Class 12.9 Flange Nuts in Zinc Flake
- Galling: can occur when excessive pressure is used to tighten a nut onto a thread, common with stainless fasteners but can also be an issue with other materials. Fasteners with damaged or fine threads are particularly prone to galling.
Some suggestions to help prevent thread galling:
Tightening the nut more slowly without excessive pressure, will frequently reduce or sometimes solve completely, the problem. As the installation RPM speed increases, the heat generated with friction during tightening escalates the chances of thread galling.
Reduce the friction by applying a suitable lubricant to the thread frequently eliminates thread galling. Typical lubricants are chloride-paraffine, molykoat lacquer, molybdenum disulphide, high pressure oil, graphite, mica, or talc, some assemblies where there is extreme pressure, corrosion resistant grease or waxes may also be effective - Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only and may not represent the actual diameter, height or width require. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and The Fastener Warehouse is not responsible for any loss, claim or damages arising therefrom. In developing this information, The Fastener Warehouse has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Technical Specification
Standard Full Nut
Type
M8 (8mm)
Thread Size
1.25mm
Thread Pitch
M8 x 1.25p Coarse
Size x Pitch
Metric - Coarse
Thread Type
Right Hand
Thread Direction
Metric
System of Measurement
5/16"
Closest Size in Imperial
13mm
Spanner Size
12.73 - 13.00mm
Across Flats Af
14.38 - 15.00mm
Across Corners Ac
6.44 - 6.93mm
Overall Nut Height B
Carbon Steel
Material
High Tensile Class 10
Grade
Zinc Plated
Finish
Moderate
Corrosion Protection Level
AS 1112
Standard
Hobson Engineering
Brand
Bremick Fasteners | Brighton Best
Alternative Brands
NH10ZCM08, N10MZ0800P2, 309008
MPN
9314818580403, 662403072178
UPC
Free Standard Shipping
Delivery
Select From The Dropdown Above
Number in Pack
